The effect of an Ni-Cr protective layer on cyclic oxidation of Ti3Al
Članak u časopisu
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
The effect of an 80Ni-20Cr (at.%) metallic coating on the cyclic oxidation behaviour of a Ti3Al-based alloy with the composition Ti-25Al-11Nb (at.%) was investigated in this study. Cyclic oxidation tests were carried out in air at 600 degrees C and 900 degrees C for 120 h. For one cycle test, the specimens were held for 24 h at test temperature and then furnace-cooled to room temperature. The oxidation rate was determined by plotting the mass gain per unit surface area of the specimen vs. exposure time. The morphology and composition of the oxidation products were characterized on the cross-section of the specimens by scanning electron microscopy, energy-dispersive X-ray spectroscopy and atomic force microscopy. The oxidation scale forms during exposure at both 600 degrees C and 900 degrees C. TiO2 is the main oxide component, whereas the Al2O3 layer appears only discontinuously. The remarkable improvement in oxidation resistance at 900 degrees C was attributed to the chemical composit...ion and structure of the scale formed on the 80Ni-20Cr coating.
Ključne reči:
atomic force microscopy / cyclic oxidation / energy-dispersive X-ray spectroscopy / multilayer oxide / Ni-Cr coating / scanning electron microscopy / Ti3AlIzvor:
Journal of Microscopy, Oxford, 2006, 224, 68-71Finansiranje / projekti:
DOI: 10.1111/j.1365-2818.2006.01667.x
ISSN: 0022-2720
PubMed: 17100910
WoS: 000241893300020
Scopus: 2-s2.0-33750835052
Kolekcije
Institucija/grupa
VinčaTY - JOUR AU - Cvijović, Ivana AU - Jovanović, Milan T. AU - Vasiljević-Radović, Dana AU - Peruško, Davor PY - 2006 UR - https://vinar.vin.bg.ac.rs/handle/123456789/3115 AB - The effect of an 80Ni-20Cr (at.%) metallic coating on the cyclic oxidation behaviour of a Ti3Al-based alloy with the composition Ti-25Al-11Nb (at.%) was investigated in this study. Cyclic oxidation tests were carried out in air at 600 degrees C and 900 degrees C for 120 h. For one cycle test, the specimens were held for 24 h at test temperature and then furnace-cooled to room temperature. The oxidation rate was determined by plotting the mass gain per unit surface area of the specimen vs. exposure time. The morphology and composition of the oxidation products were characterized on the cross-section of the specimens by scanning electron microscopy, energy-dispersive X-ray spectroscopy and atomic force microscopy. The oxidation scale forms during exposure at both 600 degrees C and 900 degrees C. TiO2 is the main oxide component, whereas the Al2O3 layer appears only discontinuously. The remarkable improvement in oxidation resistance at 900 degrees C was attributed to the chemical composition and structure of the scale formed on the 80Ni-20Cr coating. T2 - Journal of Microscopy, Oxford T1 - The effect of an Ni-Cr protective layer on cyclic oxidation of Ti3Al VL - 224 SP - 68 EP - 71 DO - 10.1111/j.1365-2818.2006.01667.x ER -
@article{ author = "Cvijović, Ivana and Jovanović, Milan T. and Vasiljević-Radović, Dana and Peruško, Davor", year = "2006", abstract = "The effect of an 80Ni-20Cr (at.%) metallic coating on the cyclic oxidation behaviour of a Ti3Al-based alloy with the composition Ti-25Al-11Nb (at.%) was investigated in this study. Cyclic oxidation tests were carried out in air at 600 degrees C and 900 degrees C for 120 h. For one cycle test, the specimens were held for 24 h at test temperature and then furnace-cooled to room temperature. The oxidation rate was determined by plotting the mass gain per unit surface area of the specimen vs. exposure time. The morphology and composition of the oxidation products were characterized on the cross-section of the specimens by scanning electron microscopy, energy-dispersive X-ray spectroscopy and atomic force microscopy. The oxidation scale forms during exposure at both 600 degrees C and 900 degrees C. TiO2 is the main oxide component, whereas the Al2O3 layer appears only discontinuously. The remarkable improvement in oxidation resistance at 900 degrees C was attributed to the chemical composition and structure of the scale formed on the 80Ni-20Cr coating.", journal = "Journal of Microscopy, Oxford", title = "The effect of an Ni-Cr protective layer on cyclic oxidation of Ti3Al", volume = "224", pages = "68-71", doi = "10.1111/j.1365-2818.2006.01667.x" }
Cvijović, I., Jovanović, M. T., Vasiljević-Radović, D.,& Peruško, D.. (2006). The effect of an Ni-Cr protective layer on cyclic oxidation of Ti3Al. in Journal of Microscopy, Oxford, 224, 68-71. https://doi.org/10.1111/j.1365-2818.2006.01667.x
Cvijović I, Jovanović MT, Vasiljević-Radović D, Peruško D. The effect of an Ni-Cr protective layer on cyclic oxidation of Ti3Al. in Journal of Microscopy, Oxford. 2006;224:68-71. doi:10.1111/j.1365-2818.2006.01667.x .
Cvijović, Ivana, Jovanović, Milan T., Vasiljević-Radović, Dana, Peruško, Davor, "The effect of an Ni-Cr protective layer on cyclic oxidation of Ti3Al" in Journal of Microscopy, Oxford, 224 (2006):68-71, https://doi.org/10.1111/j.1365-2818.2006.01667.x . .