Приказ основних података о документу
Perforated plate convective heat transfer analysis
dc.creator | Tomić, Mladen A. | |
dc.creator | Ayed, Sadoon K. | |
dc.creator | Stevanović, Žana | |
dc.creator | Đekić, Petar S. | |
dc.creator | Živković, Predrag | |
dc.creator | Vukić, Mića V. | |
dc.date.accessioned | 2018-03-01T18:08:08Z | |
dc.date.available | 2018-03-01T18:08:08Z | |
dc.date.issued | 2018 | |
dc.identifier.issn | 1290-0729 | |
dc.identifier.issn | 1778-4166 | |
dc.identifier.uri | https://vinar.vin.bg.ac.rs/handle/123456789/1927 | |
dc.description.abstract | The need for high performance heat exchangers has led to the development of many types of surfaces that enhance the rate of heat transfer. One of the heat exchanger types are the matrix heat exchangers. Matrix heat exchangers consist of a series of perforated plates, separated by a series of spacers. The present study experimentally investigates the overall heat transfer characteristics of flow through a perforated plate with 2 mm in diameter, the hole length to diameter ratio of 1 and 25.6% porosity. Numerical simulations were performed to determine the overall heat transfer in the function of geometric parameters. Reynolds numbers based on the perforated plate pitch were set in the range from 50 to 500. The results of the average Nusselt number prediction were compared with the related experimental correlations. The experimental data agreed on qualitatively with the results obtained using a CFD. Using these data, a Nusselt criterial equation was obtained. | en |
dc.relation | info:eu-repo/grantAgreement/MESTD/Integrated and Interdisciplinary Research (IIR or III)/42008/RS// | |
dc.relation | College of Applied Technical Sciences in Nis | |
dc.rights | restrictedAccess | en |
dc.source | International Journal of Thermal Sciences | en |
dc.subject | CFD | en |
dc.subject | Heat transfer | en |
dc.subject | Package | en |
dc.subject | Perforated plate | en |
dc.subject | Matrix heat exchanger | en |
dc.title | Perforated plate convective heat transfer analysis | en |
dc.type | article | en |
dc.rights.license | ARR | |
dc.rights.license | ARR | |
dcterms.abstract | Декиц, Петар С.; Стевановић Жана; Вукиц, Мица В.; Ayед, Садоон К.; Томиц, Младен A.; Зивковиц, Предраг М.; | |
dc.citation.volume | 124 | |
dc.citation.spage | 300 | |
dc.citation.epage | 306 | |
dc.identifier.wos | 000423636300025 | |
dc.identifier.doi | 10.1016/j.ijthermalsci.2017.10.021 | |
dc.citation.rank | M21 | |
dc.type.version | publishedVersion | |
dc.type.version | publishedVersion | |
dc.identifier.scopus | 2-s2.0-85032914775 |
Документи
Овај документ се појављује у следећим колекцијама
-
WoS Import
-
140 - Laboratorija za termotehniku i energetiku
Department of Thermal Engineering and Energy