Nanoporous activated carbon cloth as a versatile material for hydrogen adsorption, selective gas separation and electrochemical energy storage
Samo za registrovane korisnike
2017
Autori
Kostoglou, Nikolaos![](/themes/MirageVinar/images/orcid.png)
Koczwara, Christian
![](/themes/MirageVinar/images/orcid.png)
Prehal, Christian
Terziyska, Velislava
Babić, Biljana M.
Matović, Branko
![](/themes/MirageVinar/images/orcid.png)
Constantinides, Georgios
![](/themes/MirageVinar/images/orcid.png)
Tampaxis, Christos
Charalambopoulou, Georgia
Steriotis, Theodore
![](/themes/MirageVinar/images/orcid.png)
Hinder, Steve
Baker, Mark
Polychronopoulou, Kyriaki
![](/themes/MirageVinar/images/orcid.png)
Doumanidis, Charalabos
Paris, Oskar
Mitterer, Christian
![](/themes/MirageVinar/images/orcid.png)
Rebholz, Claus
Članak u časopisu (Objavljena verzija)
![](/themes/MirageVinar//images/creativecommons/arr.png)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
The efficient storage of energy combined with a minimum carbon footprint is still considered one of the major challenges towards the transition to a progressive, sustainable and environmental friendly society on a global scale. The energy storage in pure chemical form using gas carriers with high heating values, including H-2 and CH4, as well as via electrochemical means using state-of-the-art devices, such as batteries or supercapacitors, are two of the most attractive alternatives for the combustion of finite, carbon-rich and environmentally harmful fossil fuels, such as diesel and gasoline. A few-step, reproducible and scalable method is presented in this study for the preparation of an ultra-microporous (average pore size around 0.6 nm) activated carbon cloth (ACC) with large specific area ( GT 1200 m(2)/g) and pore volume (similar to 0.5 cm(3)/g) upon combining chemical impregnation, carbonization and CO2 activation of a low-cost cellulose-based polymeric fabric. The ACC material ...shows a versatile character towards three different applications, including H2 storage via cryo-adsorption, separation of energy-dense CO2/CH4 mixtures via selective adsorption and electrochemical energy storage using super-capacitor technology. Fully reversible H-2 uptake capacities in excess of 3.1 wt% at 77 K and similar to 72 bar along with a significant heat of adsorption value of up to 8.4 kJ/mol for low surface coverage have been found. Upon incorporation of low-pressure sorption data in the ideal adsorbed solution theory model, the ACC is predicted to selectively adsorb about 4.5 times more CO2 than CH4 in ambient conditions and thus represents an appealing adsorbent for the purification of such gaseous mixtures. Finally, an electric double-layer capacitor device was assembled and tested for its electrochemical performance, constructed of binder-free and flexible ACC electrodes and aqueous CsCl electrolyte. The full-cell exhibits a gravimetric capacitance of similar to 121 F/g for a specific current of 0.02 A/g, which relative to the ACCs specific area, is superior to commercially available activated carbons. A capacitance retention of more than 97% was observed after 10,000 charging/discharging cycles, thus indicating the ACCs suitability for demanding and high-performance energy storage on a commercial scale. The enhanced performance in all tested applications seems to be attributed to the mean ultra-micropore size of the ACC material instead of the available specific area and/or pore volume.
Ključne reči:
Activated carbon cloth / Nanoporous material / Adsorption / H-2 storage / CO2/CH4 selectivity / Supercapacitor electrodeIzvor:
Nano Energy, 2017, 40, 49-64Finansiranje / projekti:
- H2FC - Integrating European Infrastructure to support science and development of Hydrogen- and Fuel Cell Technologies towards European Strategy for Sustainable, Competitive and Secure Energy (EU-FP7-284522)
- Khalifa University Internal Research Fund, Austrian Klima- und Energiefonds via FFG program Energieforschung (Project: Hybrid Supercap), Montanuniversitat Leoben
DOI: 10.1016/j.nanoen.2017.07.056
ISSN: 2211-2855; 2211-3282
WoS: 000411687800007
Scopus: 2-s2.0-85028031963
Kolekcije
Institucija/grupa
VinčaTY - JOUR AU - Kostoglou, Nikolaos AU - Koczwara, Christian AU - Prehal, Christian AU - Terziyska, Velislava AU - Babić, Biljana M. AU - Matović, Branko AU - Constantinides, Georgios AU - Tampaxis, Christos AU - Charalambopoulou, Georgia AU - Steriotis, Theodore AU - Hinder, Steve AU - Baker, Mark AU - Polychronopoulou, Kyriaki AU - Doumanidis, Charalabos AU - Paris, Oskar AU - Mitterer, Christian AU - Rebholz, Claus PY - 2017 UR - https://vinar.vin.bg.ac.rs/handle/123456789/1749 AB - The efficient storage of energy combined with a minimum carbon footprint is still considered one of the major challenges towards the transition to a progressive, sustainable and environmental friendly society on a global scale. The energy storage in pure chemical form using gas carriers with high heating values, including H-2 and CH4, as well as via electrochemical means using state-of-the-art devices, such as batteries or supercapacitors, are two of the most attractive alternatives for the combustion of finite, carbon-rich and environmentally harmful fossil fuels, such as diesel and gasoline. A few-step, reproducible and scalable method is presented in this study for the preparation of an ultra-microporous (average pore size around 0.6 nm) activated carbon cloth (ACC) with large specific area ( GT 1200 m(2)/g) and pore volume (similar to 0.5 cm(3)/g) upon combining chemical impregnation, carbonization and CO2 activation of a low-cost cellulose-based polymeric fabric. The ACC material shows a versatile character towards three different applications, including H2 storage via cryo-adsorption, separation of energy-dense CO2/CH4 mixtures via selective adsorption and electrochemical energy storage using super-capacitor technology. Fully reversible H-2 uptake capacities in excess of 3.1 wt% at 77 K and similar to 72 bar along with a significant heat of adsorption value of up to 8.4 kJ/mol for low surface coverage have been found. Upon incorporation of low-pressure sorption data in the ideal adsorbed solution theory model, the ACC is predicted to selectively adsorb about 4.5 times more CO2 than CH4 in ambient conditions and thus represents an appealing adsorbent for the purification of such gaseous mixtures. Finally, an electric double-layer capacitor device was assembled and tested for its electrochemical performance, constructed of binder-free and flexible ACC electrodes and aqueous CsCl electrolyte. The full-cell exhibits a gravimetric capacitance of similar to 121 F/g for a specific current of 0.02 A/g, which relative to the ACCs specific area, is superior to commercially available activated carbons. A capacitance retention of more than 97% was observed after 10,000 charging/discharging cycles, thus indicating the ACCs suitability for demanding and high-performance energy storage on a commercial scale. The enhanced performance in all tested applications seems to be attributed to the mean ultra-micropore size of the ACC material instead of the available specific area and/or pore volume. T2 - Nano Energy T1 - Nanoporous activated carbon cloth as a versatile material for hydrogen adsorption, selective gas separation and electrochemical energy storage VL - 40 SP - 49 EP - 64 DO - 10.1016/j.nanoen.2017.07.056 ER -
@article{ author = "Kostoglou, Nikolaos and Koczwara, Christian and Prehal, Christian and Terziyska, Velislava and Babić, Biljana M. and Matović, Branko and Constantinides, Georgios and Tampaxis, Christos and Charalambopoulou, Georgia and Steriotis, Theodore and Hinder, Steve and Baker, Mark and Polychronopoulou, Kyriaki and Doumanidis, Charalabos and Paris, Oskar and Mitterer, Christian and Rebholz, Claus", year = "2017", abstract = "The efficient storage of energy combined with a minimum carbon footprint is still considered one of the major challenges towards the transition to a progressive, sustainable and environmental friendly society on a global scale. The energy storage in pure chemical form using gas carriers with high heating values, including H-2 and CH4, as well as via electrochemical means using state-of-the-art devices, such as batteries or supercapacitors, are two of the most attractive alternatives for the combustion of finite, carbon-rich and environmentally harmful fossil fuels, such as diesel and gasoline. A few-step, reproducible and scalable method is presented in this study for the preparation of an ultra-microporous (average pore size around 0.6 nm) activated carbon cloth (ACC) with large specific area ( GT 1200 m(2)/g) and pore volume (similar to 0.5 cm(3)/g) upon combining chemical impregnation, carbonization and CO2 activation of a low-cost cellulose-based polymeric fabric. The ACC material shows a versatile character towards three different applications, including H2 storage via cryo-adsorption, separation of energy-dense CO2/CH4 mixtures via selective adsorption and electrochemical energy storage using super-capacitor technology. Fully reversible H-2 uptake capacities in excess of 3.1 wt% at 77 K and similar to 72 bar along with a significant heat of adsorption value of up to 8.4 kJ/mol for low surface coverage have been found. Upon incorporation of low-pressure sorption data in the ideal adsorbed solution theory model, the ACC is predicted to selectively adsorb about 4.5 times more CO2 than CH4 in ambient conditions and thus represents an appealing adsorbent for the purification of such gaseous mixtures. Finally, an electric double-layer capacitor device was assembled and tested for its electrochemical performance, constructed of binder-free and flexible ACC electrodes and aqueous CsCl electrolyte. The full-cell exhibits a gravimetric capacitance of similar to 121 F/g for a specific current of 0.02 A/g, which relative to the ACCs specific area, is superior to commercially available activated carbons. A capacitance retention of more than 97% was observed after 10,000 charging/discharging cycles, thus indicating the ACCs suitability for demanding and high-performance energy storage on a commercial scale. The enhanced performance in all tested applications seems to be attributed to the mean ultra-micropore size of the ACC material instead of the available specific area and/or pore volume.", journal = "Nano Energy", title = "Nanoporous activated carbon cloth as a versatile material for hydrogen adsorption, selective gas separation and electrochemical energy storage", volume = "40", pages = "49-64", doi = "10.1016/j.nanoen.2017.07.056" }
Kostoglou, N., Koczwara, C., Prehal, C., Terziyska, V., Babić, B. M., Matović, B., Constantinides, G., Tampaxis, C., Charalambopoulou, G., Steriotis, T., Hinder, S., Baker, M., Polychronopoulou, K., Doumanidis, C., Paris, O., Mitterer, C.,& Rebholz, C.. (2017). Nanoporous activated carbon cloth as a versatile material for hydrogen adsorption, selective gas separation and electrochemical energy storage. in Nano Energy, 40, 49-64. https://doi.org/10.1016/j.nanoen.2017.07.056
Kostoglou N, Koczwara C, Prehal C, Terziyska V, Babić BM, Matović B, Constantinides G, Tampaxis C, Charalambopoulou G, Steriotis T, Hinder S, Baker M, Polychronopoulou K, Doumanidis C, Paris O, Mitterer C, Rebholz C. Nanoporous activated carbon cloth as a versatile material for hydrogen adsorption, selective gas separation and electrochemical energy storage. in Nano Energy. 2017;40:49-64. doi:10.1016/j.nanoen.2017.07.056 .
Kostoglou, Nikolaos, Koczwara, Christian, Prehal, Christian, Terziyska, Velislava, Babić, Biljana M., Matović, Branko, Constantinides, Georgios, Tampaxis, Christos, Charalambopoulou, Georgia, Steriotis, Theodore, Hinder, Steve, Baker, Mark, Polychronopoulou, Kyriaki, Doumanidis, Charalabos, Paris, Oskar, Mitterer, Christian, Rebholz, Claus, "Nanoporous activated carbon cloth as a versatile material for hydrogen adsorption, selective gas separation and electrochemical energy storage" in Nano Energy, 40 (2017):49-64, https://doi.org/10.1016/j.nanoen.2017.07.056 . .