The effect of polyhedral oligosilsesquioxanes (POSS) on cavitation resistance of hybrid acrylate films
Само за регистроване кориснике
2020
Аутори
Kalifa, MustafaTomić, Nataša Z.
![](/themes/MirageVinar/images/orcid.png)
Vuksanović, Marija M.
![](/themes/MirageVinar/images/orcid.png)
Stevanović, Sanja
Đokić, Veljko
![](/themes/MirageVinar/images/orcid.png)
Volkov-Husović, Tatjana
![](/themes/MirageVinar/images/orcid.png)
Pavlović, Vladimir B.
![](/themes/MirageVinar/images/orcid.png)
Jančić-Heinemann, Radmila
![](/themes/MirageVinar/images/orcid.png)
Marinković, Aleksandar D.
![](/themes/MirageVinar/images/orcid.png)
Чланак у часопису (Објављена верзија)
![](/themes/MirageVinar//images/creativecommons/arr.png)
Метаподаци
Приказ свих података о документуАпстракт
Cavitation erosion of hybrid acrylate composite films with polyhedraloligosilsesquioxanes (POSS) was investigated in this study. The hybrid films aremade with 1, 3 and 5 wt% of POSS reagents containing: (a) hydroxyl (POSS-M),(b) both hydroxyl and allyl (POSS-M-A) and (c) methacryloyl groups (POSS-MCl).Addition of 5 wt% POSS-M-A caused the highest microhardness increase for49.8%, in comparison to the pure matrix material. Cavitation resistance of hybridfilms, estimated as the time-dependent mass loss, was improved by POSS addition.POSS-M-A addition (5 wt%) contributed to 94% lower mass loss comparingto pure Bis-GMA/TEGDMA film. Scanning electron (SEM) and atomic forcemicroscopy (AFM) showed the lowest surface roughness obtained for compositewith POSS-M-A. The improved hardness and wear resistance of the compositefilms indicated that POSS-M-A filler enhanced interfacial adhesion and reinforcingof the Bis-GMA/TEGDMA matrix.
Кључне речи:
cavitation erosion / coatings / crosslinking / microscopy / surfacesИзвор:
Polymer Composites, 2020, 3403-3410Финансирање / пројекти:
- Развој опреме и процеса добијања полимерних композитних материјала са унапред дефинисаним функционалним својствима (RS-MESTD-Technological Development (TD or TR)-34011)
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200135 (Универзитет у Београду, Технолошко-металуршки факултет) (RS-MESTD-inst-2020-200135)
DOI: 10.1002/pc.25629
ISSN: 0272-8397
WoS: 000532986100001
Scopus: 2-s2.0-85085014224
Институција/група
VinčaTY - JOUR AU - Kalifa, Mustafa AU - Tomić, Nataša Z. AU - Vuksanović, Marija M. AU - Stevanović, Sanja AU - Đokić, Veljko AU - Volkov-Husović, Tatjana AU - Pavlović, Vladimir B. AU - Jančić-Heinemann, Radmila AU - Marinković, Aleksandar D. PY - 2020 UR - https://vinar.vin.bg.ac.rs/handle/123456789/9001 AB - Cavitation erosion of hybrid acrylate composite films with polyhedraloligosilsesquioxanes (POSS) was investigated in this study. The hybrid films aremade with 1, 3 and 5 wt% of POSS reagents containing: (a) hydroxyl (POSS-M),(b) both hydroxyl and allyl (POSS-M-A) and (c) methacryloyl groups (POSS-MCl).Addition of 5 wt% POSS-M-A caused the highest microhardness increase for49.8%, in comparison to the pure matrix material. Cavitation resistance of hybridfilms, estimated as the time-dependent mass loss, was improved by POSS addition.POSS-M-A addition (5 wt%) contributed to 94% lower mass loss comparingto pure Bis-GMA/TEGDMA film. Scanning electron (SEM) and atomic forcemicroscopy (AFM) showed the lowest surface roughness obtained for compositewith POSS-M-A. The improved hardness and wear resistance of the compositefilms indicated that POSS-M-A filler enhanced interfacial adhesion and reinforcingof the Bis-GMA/TEGDMA matrix. T2 - Polymer Composites T1 - The effect of polyhedral oligosilsesquioxanes (POSS) on cavitation resistance of hybrid acrylate films SP - 3403 EP - 3410 DO - 10.1002/pc.25629 ER -
@article{ author = "Kalifa, Mustafa and Tomić, Nataša Z. and Vuksanović, Marija M. and Stevanović, Sanja and Đokić, Veljko and Volkov-Husović, Tatjana and Pavlović, Vladimir B. and Jančić-Heinemann, Radmila and Marinković, Aleksandar D.", year = "2020", abstract = "Cavitation erosion of hybrid acrylate composite films with polyhedraloligosilsesquioxanes (POSS) was investigated in this study. The hybrid films aremade with 1, 3 and 5 wt% of POSS reagents containing: (a) hydroxyl (POSS-M),(b) both hydroxyl and allyl (POSS-M-A) and (c) methacryloyl groups (POSS-MCl).Addition of 5 wt% POSS-M-A caused the highest microhardness increase for49.8%, in comparison to the pure matrix material. Cavitation resistance of hybridfilms, estimated as the time-dependent mass loss, was improved by POSS addition.POSS-M-A addition (5 wt%) contributed to 94% lower mass loss comparingto pure Bis-GMA/TEGDMA film. Scanning electron (SEM) and atomic forcemicroscopy (AFM) showed the lowest surface roughness obtained for compositewith POSS-M-A. The improved hardness and wear resistance of the compositefilms indicated that POSS-M-A filler enhanced interfacial adhesion and reinforcingof the Bis-GMA/TEGDMA matrix.", journal = "Polymer Composites", title = "The effect of polyhedral oligosilsesquioxanes (POSS) on cavitation resistance of hybrid acrylate films", pages = "3403-3410", doi = "10.1002/pc.25629" }
Kalifa, M., Tomić, N. Z., Vuksanović, M. M., Stevanović, S., Đokić, V., Volkov-Husović, T., Pavlović, V. B., Jančić-Heinemann, R.,& Marinković, A. D.. (2020). The effect of polyhedral oligosilsesquioxanes (POSS) on cavitation resistance of hybrid acrylate films. in Polymer Composites, 3403-3410. https://doi.org/10.1002/pc.25629
Kalifa M, Tomić NZ, Vuksanović MM, Stevanović S, Đokić V, Volkov-Husović T, Pavlović VB, Jančić-Heinemann R, Marinković AD. The effect of polyhedral oligosilsesquioxanes (POSS) on cavitation resistance of hybrid acrylate films. in Polymer Composites. 2020;:3403-3410. doi:10.1002/pc.25629 .
Kalifa, Mustafa, Tomić, Nataša Z., Vuksanović, Marija M., Stevanović, Sanja, Đokić, Veljko, Volkov-Husović, Tatjana, Pavlović, Vladimir B., Jančić-Heinemann, Radmila, Marinković, Aleksandar D., "The effect of polyhedral oligosilsesquioxanes (POSS) on cavitation resistance of hybrid acrylate films" in Polymer Composites (2020):3403-3410, https://doi.org/10.1002/pc.25629 . .