Modeling of transport processes in the cigarette principle combustion furnace
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
This paper presents numerical and experimental investigations of complex and interrelated physical and chemical phenomena that occur during combustion of baled soybean residue in the furnace with the cigarette type of combustion. The result of comprehensive research is reactive flow model of biomass combustion inside furnace. Model is described by set of PDE which define momentum, heat and mass transfer processes in porous and fluid system. The main aim of developed CFD model is numerical simulation of combustion process inside the cigarette furnace. It is also used to provide deeper insight in complex processes occurring during biomass combustion. Verification of proposed numerical model was performed through comprehensive experimental tests on the experimental-industrial plant of 1.5 MW boiler for heating the greenhouses in the Agricultural Corporation in Belgrade. The tests included measurement of flow rate and air and flue gas temperature input and output values on the furnace that... are taken as the boundary conditions of the developed model. Comparison of the experimental results shows satisfactory agreement with numerical results (the maximum relative deviation of calculation and measurement temperatures are 10-45%), therefore the developed mathematical model could be used to analyse the effects of structural and parametric (fuel composition, power rate, air excess etc.) changes of the facility, from the standpoint of energy efficiency and ecology.
Кључне речи:
baled biomass / combustion / modeling / experimentalИзвор:
Thermal Science, 2019, 23, Suppl. 5, 1499-1510Финансирање / пројекти:
- Развој и унапређење технологија за енергетски ефикасно коришћење више форми пољопривредне и шумске биомасе на еколошки прихватљив начин, уз могућност когенерације (RS-MESTD-Integrated and Interdisciplinary Research (IIR or III)-42011)
- Унапређење индустријског постројења са флуидизованим слојем у оквиру развоја технологије за енергетски ефикасно и еколошки оправдано сагоревање различитих отпадних материја у флуидизационом ложишту (RS-MESTD-Technological Development (TD or TR)-33042)
DOI: 10.2298/TSCI180226318E
ISSN: 0354-9836
WoS: 000509489400009
Scopus: 2-s2.0-85084043719
Институција/група
VinčaTY - JOUR AU - Erić, Aleksandar AU - Nemoda, Stevan AU - Komatina, Mirko AU - Repić, Branislav AU - Dakic, Dragoljub PY - 2019 UR - https://vinar.vin.bg.ac.rs/handle/123456789/8989 AB - This paper presents numerical and experimental investigations of complex and interrelated physical and chemical phenomena that occur during combustion of baled soybean residue in the furnace with the cigarette type of combustion. The result of comprehensive research is reactive flow model of biomass combustion inside furnace. Model is described by set of PDE which define momentum, heat and mass transfer processes in porous and fluid system. The main aim of developed CFD model is numerical simulation of combustion process inside the cigarette furnace. It is also used to provide deeper insight in complex processes occurring during biomass combustion. Verification of proposed numerical model was performed through comprehensive experimental tests on the experimental-industrial plant of 1.5 MW boiler for heating the greenhouses in the Agricultural Corporation in Belgrade. The tests included measurement of flow rate and air and flue gas temperature input and output values on the furnace that are taken as the boundary conditions of the developed model. Comparison of the experimental results shows satisfactory agreement with numerical results (the maximum relative deviation of calculation and measurement temperatures are 10-45%), therefore the developed mathematical model could be used to analyse the effects of structural and parametric (fuel composition, power rate, air excess etc.) changes of the facility, from the standpoint of energy efficiency and ecology. T2 - Thermal Science T1 - Modeling of transport processes in the cigarette principle combustion furnace VL - 23 IS - Suppl. 5 SP - 1499 EP - 1510 DO - 10.2298/TSCI180226318E ER -
@article{ author = "Erić, Aleksandar and Nemoda, Stevan and Komatina, Mirko and Repić, Branislav and Dakic, Dragoljub", year = "2019", abstract = "This paper presents numerical and experimental investigations of complex and interrelated physical and chemical phenomena that occur during combustion of baled soybean residue in the furnace with the cigarette type of combustion. The result of comprehensive research is reactive flow model of biomass combustion inside furnace. Model is described by set of PDE which define momentum, heat and mass transfer processes in porous and fluid system. The main aim of developed CFD model is numerical simulation of combustion process inside the cigarette furnace. It is also used to provide deeper insight in complex processes occurring during biomass combustion. Verification of proposed numerical model was performed through comprehensive experimental tests on the experimental-industrial plant of 1.5 MW boiler for heating the greenhouses in the Agricultural Corporation in Belgrade. The tests included measurement of flow rate and air and flue gas temperature input and output values on the furnace that are taken as the boundary conditions of the developed model. Comparison of the experimental results shows satisfactory agreement with numerical results (the maximum relative deviation of calculation and measurement temperatures are 10-45%), therefore the developed mathematical model could be used to analyse the effects of structural and parametric (fuel composition, power rate, air excess etc.) changes of the facility, from the standpoint of energy efficiency and ecology.", journal = "Thermal Science", title = "Modeling of transport processes in the cigarette principle combustion furnace", volume = "23", number = "Suppl. 5", pages = "1499-1510", doi = "10.2298/TSCI180226318E" }
Erić, A., Nemoda, S., Komatina, M., Repić, B.,& Dakic, D.. (2019). Modeling of transport processes in the cigarette principle combustion furnace. in Thermal Science, 23(Suppl. 5), 1499-1510. https://doi.org/10.2298/TSCI180226318E
Erić A, Nemoda S, Komatina M, Repić B, Dakic D. Modeling of transport processes in the cigarette principle combustion furnace. in Thermal Science. 2019;23(Suppl. 5):1499-1510. doi:10.2298/TSCI180226318E .
Erić, Aleksandar, Nemoda, Stevan, Komatina, Mirko, Repić, Branislav, Dakic, Dragoljub, "Modeling of transport processes in the cigarette principle combustion furnace" in Thermal Science, 23, no. Suppl. 5 (2019):1499-1510, https://doi.org/10.2298/TSCI180226318E . .