Prikaz osnovnih podataka o dokumentu

dc.creatorPorobić, Slavica
dc.creatorMarković, Gordana
dc.creatorRistić, Ivan
dc.creatorSamaržija-Jovanović, Suzana
dc.creatorJovanović, Vojislav
dc.creatorBudinski-Simendić, Jaroslava K.
dc.creatorMarinović-Cincović, Milena
dc.date.accessioned2020-01-31T09:23:11Z
dc.date.available2020-01-31T09:23:11Z
dc.date.issued2019
dc.identifier.issn0272-8397
dc.identifier.urihttps://vinar.vin.bg.ac.rs/handle/123456789/8466
dc.description.abstractIn this applicative work, two types of silica filler were used to increase the adhesion strength between steel and elastomeric hybrid materials based on chlorosulfonated polyethylene rubber (CSM) and polychloroprene rubber (CR) as network precursors. Precipitated silica (PS) with the average size of primary particles 15 nm and diatomaceous earth (DE) with the average size of primary particles 28 μm were used to ascertain differences in metal-elastomer compounds adhesion strength caused by different particle size. The ratio of network precursors in CSM/CR rubber blends was 50:50 (w/w). The filler loading was in the range of 0–35 phr. Characteristics of the obtained composites were examined by combining the cure kinetics, adhesion strength and the dynamic mechanical properties. The viscoelasticity of obtained hybrid materials was assessed by the mechanical spectrometer (in a single cantilever bending mode) in the temperature range from −50 °C to 150 °C using multifrequency mode. POLYM. COMPOS., 2018. © 2018 Society of Plastics Engineers. © 2018 Society of Plastics Engineersen
dc.language.isoen
dc.relationinfo:eu-repo/grantAgreement/MESTD/Basic Research (BR or ON)/172056/RS//
dc.relationinfo:eu-repo/grantAgreement/MESTD/Integrated and Interdisciplinary Research (IIR or III)/45022/RS//
dc.relationinfo:eu-repo/grantAgreement/MESTD/Integrated and Interdisciplinary Research (IIR or III)/45020/RS//
dc.rightsrestrictedAccess
dc.sourcePolymer Composites
dc.titleHybrid materials based on rubber blend nanocompositesen
dc.typearticleen
dc.rights.licenseARR
dcterms.abstractБудински‐Симендић, Јарослава; Мариновић‐Цинцовић, Милена; Марковић, Гордана; Јовановић, Војислав; Поробић, Славица; Ристић, Иван; Самаржија‐Јовановић, Сузана;
dc.rights.holder© 2018 Society of Plastics Engineers
dc.citation.volume40
dc.citation.issue8
dc.citation.spage3056
dc.citation.epage3064
dc.identifier.wos000478616300010
dc.identifier.doi10.1002/pc.25150
dc.citation.rankM22
dc.type.versionpublishedVersion
dc.identifier.scopus2-s2.0-85059069528


Dokumenti

Thumbnail

Ovaj dokument se pojavljuje u sledećim kolekcijama

Prikaz osnovnih podataka o dokumentu