The friction theory for estimating viscosity of candidate solvents for flue gas desulfurization processes
Само за регистроване кориснике
АуториJovanović, Jovan D.
Majstorović, Divna M.
Živković, Nikola V.
Kijevčanin, Mirjana Lj.
Živković, Emila M.
Чланак у часопису (Објављена верзија)
© 2018 Elsevier B.V.
МетаподациПриказ свих података о документу
In this study, applicability of the friction theory for the viscosity estimation of pure substances and binary liquid mixtures, used in regenerative flue gas desulphurization processes, was investigated. Theory was tested on the selected solvents that have already found commercial application, tetraethylene glycol dimethyl ether, n‑methyl‑2‑pyrrolidone and n,n‑dimethylaniline, in mixtures with alcohols 1‑butanol, 2‑butanol or 1‑hexanol. The results were compared with experimental viscosity data for eleven systems. In the calculation procedure, friction theory was coupled both with the Peng-Robinson (PR) and Soave-Redlich-Kwong (SRK) equations of state (EoS). Almost identical deviations, under 0.2% with both EoS, were obtained for pure compounds. For viscosity of mixtures, in almost all cases, better results were obtained using PR EoS, with values of percentage deviations less than 4%. Additionally, the possibility of simultaneous density calculations was checked and the obtained values... were compared with experimental data. Application of this model for viscosity modeling of the investigated systems was justified by comparison of the obtained results with other commonly used predictive models, UNIFAC-VISCO and ASOG-VISCO. © 2018 Elsevier B.V.
Кључне речи:Friction theory / Modeling / Viscosity / Binary mixtures / Flue gas desulphurization
Извор:Journal of Molecular Liquids, 2018, 271, 696-703
- Нови индустријски и еколошки аспекти примене хемијске термодинамике на унапређење хемијских процеса са вишефазним и вишекомпонентним системима (RS-172063)
ISSN: 0167-7322 (print)