Impact of austenitic steels’ mechanical properties on allowed stress and wall thickness of pressure equipment
AuthorsPetronić, Sanja Z.
Birdeanu, Aurel Valentin
Jovičić, Radomir D.
Article (Published version)
MetadataShow full item record
The Pressure Equipment Directive (PED) and Regulations on Technical Requirements for Designing, Manufacturing and Conformity Assessment of Pressure Equipment bring a number of changes to the design of pressure equipment in relation to the Technical Regulations for Stable Pressure Vessels, 1983. Among the most important changes are the essential safety requirements for pressure equipment. The changes in the formula, for all materials, for calculating the allowable stresses, as well as the change in the value of the test pressure, the new Regulations use the 1.0% proof strength as the relevant value for calculating the permissible membrane stress and thickness of pressure equipment walls. In this paper, the differences in the allowable stresses, the required wall thicknesses, and the approximate savings in the material in the case of a milk reservoir, calculated according to the requirements of the Directive and the new Regulations on one hand, and the old Regulations on the other, are p...resented. © 2018 The Author.
Keywords:austenitic steels / Maximum allowable stresses / Pressure equipment / Technical design requirements / Tensile strength / Yield strength
Source:Structural Integrity and Life, 2018, 18, 1, 45-51
- Developed new methods for diagnosis and examination mechanical structures (RS-35040)
- Research and verification of the multidisciplinary forensic methods in (RS-37021)
ISSN: 1451-3749 (print); 1820-7863 (electronic)