Preparation of smallest microparticles of poly-D,L-lactide by modified precipitation method: Influence of the process parameters
Апстракт
Biodegradable microspheres such as those made of poly-D,L-lactide (PDLLA) are widely investigated delivery systems for drugs or antigens. The aim of this study was to examine experimental conditions in order to produce PDLLA microspheres with the best properties for controlled and sustained drug delivery by the modified precipitation method. For this purpose, the following parameters were varied: co-solvent (methanol or ethanol), the concentration of stabilizer polyvinyl alcohol (PVA), chloroform-to-water ratio and the speed and time of homogenization. Scanning electron microscopy (SEM) and stereological analysis were used to characterize the particles. The average size and morphology of the microspheres varied substantially with preparation conditions from 8.44–1.25 μm. Results showed that the smallest particles were obtained with methanol, 1% PVA and with 10 min of homogenization at 21,000 rpm. Microsc. Res. Tech., 2008. © 2007 Wiley-Liss, Inc.
Кључне речи:
microspheres / poly(D,L-lactide) / modified precipitation method / scanning electron microscopy / stereological analysis / PDLLAИзвор:
Microscopy Research and Technique, 2008, 86-92Издавач:
- Wiley
DOI: 10.1002/jemt.20529
ISSN: 1097-0029
WoS: 000253361200002
Scopus: 2-s2.0-39449102972
Колекције
Институција/група
VinčaTY - JOUR AU - Jovanović, Ivana AU - Jordović, Branka AU - Petković, Marijana AU - Ignjatović, Nenad L. AU - Uskoković, Dragan PY - 2008 UR - http://dais.sanu.ac.rs/123456789/177 UR - https://vinar.vin.bg.ac.rs/handle/123456789/7360 AB - Biodegradable microspheres such as those made of poly-D,L-lactide (PDLLA) are widely investigated delivery systems for drugs or antigens. The aim of this study was to examine experimental conditions in order to produce PDLLA microspheres with the best properties for controlled and sustained drug delivery by the modified precipitation method. For this purpose, the following parameters were varied: co-solvent (methanol or ethanol), the concentration of stabilizer polyvinyl alcohol (PVA), chloroform-to-water ratio and the speed and time of homogenization. Scanning electron microscopy (SEM) and stereological analysis were used to characterize the particles. The average size and morphology of the microspheres varied substantially with preparation conditions from 8.44–1.25 μm. Results showed that the smallest particles were obtained with methanol, 1% PVA and with 10 min of homogenization at 21,000 rpm. Microsc. Res. Tech., 2008. © 2007 Wiley-Liss, Inc. PB - Wiley T2 - Microscopy Research and Technique T1 - Preparation of smallest microparticles of poly-D,L-lactide by modified precipitation method: Influence of the process parameters SP - 86 EP - 92 DO - 10.1002/jemt.20529 ER -
@article{ author = "Jovanović, Ivana and Jordović, Branka and Petković, Marijana and Ignjatović, Nenad L. and Uskoković, Dragan", year = "2008", abstract = "Biodegradable microspheres such as those made of poly-D,L-lactide (PDLLA) are widely investigated delivery systems for drugs or antigens. The aim of this study was to examine experimental conditions in order to produce PDLLA microspheres with the best properties for controlled and sustained drug delivery by the modified precipitation method. For this purpose, the following parameters were varied: co-solvent (methanol or ethanol), the concentration of stabilizer polyvinyl alcohol (PVA), chloroform-to-water ratio and the speed and time of homogenization. Scanning electron microscopy (SEM) and stereological analysis were used to characterize the particles. The average size and morphology of the microspheres varied substantially with preparation conditions from 8.44–1.25 μm. Results showed that the smallest particles were obtained with methanol, 1% PVA and with 10 min of homogenization at 21,000 rpm. Microsc. Res. Tech., 2008. © 2007 Wiley-Liss, Inc.", publisher = "Wiley", journal = "Microscopy Research and Technique", title = "Preparation of smallest microparticles of poly-D,L-lactide by modified precipitation method: Influence of the process parameters", pages = "86-92", doi = "10.1002/jemt.20529" }
Jovanović, I., Jordović, B., Petković, M., Ignjatović, N. L.,& Uskoković, D.. (2008). Preparation of smallest microparticles of poly-D,L-lactide by modified precipitation method: Influence of the process parameters. in Microscopy Research and Technique Wiley., 86-92. https://doi.org/10.1002/jemt.20529
Jovanović I, Jordović B, Petković M, Ignjatović NL, Uskoković D. Preparation of smallest microparticles of poly-D,L-lactide by modified precipitation method: Influence of the process parameters. in Microscopy Research and Technique. 2008;:86-92. doi:10.1002/jemt.20529 .
Jovanović, Ivana, Jordović, Branka, Petković, Marijana, Ignjatović, Nenad L., Uskoković, Dragan, "Preparation of smallest microparticles of poly-D,L-lactide by modified precipitation method: Influence of the process parameters" in Microscopy Research and Technique (2008):86-92, https://doi.org/10.1002/jemt.20529 . .