An investigation on synthesis development of high hardened, high conductivity Cu-Zr and Cu-Zr-ZrB2 alloys through green compact laser sintering
Samo za registrovane korisnike
2015
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
Cold pressed mechanically alloyed Cu-1Zr (wt%) and Cu-4.1Zr-1.1B (wt%) powders were sintered by laser irradiation. Laser employed was pulsed, millisecond Nd:YAG laser system. The influence of different sintering parameters on structural, mechanical, and physical properties of laser-sintered materials was investigated. Microstructural changes during laser sintering were studied using scanning electron microscopy and X-ray diffraction. High hardening of the Cu-Zr alloy is achieved by thermal treatment due to the influence of the developed rapidly solidified structure and precipitation of metastable CuZr. In ternary Cu-Zr-B alloy rapidly solidified structure, as well as the presence of ZrB2 particles and metastable CuZr phase, affected much higher degree of copper matrix hardening which, thanks to the ceramic particles, is retained at high temperatures. It was determined that the optimum combination of high density, microhardness, and electrical conductivity is reached using the following... parameters: laser frequency 3 Hz, laser pulse duration 8 ms, pulse energy similar to 19 J, number of scans 3 (binary alloy), i.e., 4 (ternary alloy).
Ključne reči:
Copper matrix alloy / Laser sintering / Precipitation of metastable CuZr / In situ ZrB2 formation / Electron microscopy / MicrohardnessIzvor:
International Journal of Advanced Manufacturing Technology, 2015, 80, 5-8, 1049-1057Finansiranje / projekti:
- Uticaj nano i mikrostrukturnih konstituenata na sintezu i karakteristike savremenih kompozitnih materijala sa metalnom osnovom (RS-MESTD-Basic Research (BR or ON)-172005)
DOI: 10.1007/s00170-015-7098-y
ISSN: 0268-3768; 1433-3015
WoS: 000360700900027
Scopus: 2-s2.0-84949964018
Kolekcije
Institucija/grupa
VinčaTY - JOUR AU - Stašić, Jelena AU - Rajković, Višeslava M. AU - Ružić, Jovana AU - Božić, Dušan PY - 2015 UR - https://vinar.vin.bg.ac.rs/handle/123456789/720 AB - Cold pressed mechanically alloyed Cu-1Zr (wt%) and Cu-4.1Zr-1.1B (wt%) powders were sintered by laser irradiation. Laser employed was pulsed, millisecond Nd:YAG laser system. The influence of different sintering parameters on structural, mechanical, and physical properties of laser-sintered materials was investigated. Microstructural changes during laser sintering were studied using scanning electron microscopy and X-ray diffraction. High hardening of the Cu-Zr alloy is achieved by thermal treatment due to the influence of the developed rapidly solidified structure and precipitation of metastable CuZr. In ternary Cu-Zr-B alloy rapidly solidified structure, as well as the presence of ZrB2 particles and metastable CuZr phase, affected much higher degree of copper matrix hardening which, thanks to the ceramic particles, is retained at high temperatures. It was determined that the optimum combination of high density, microhardness, and electrical conductivity is reached using the following parameters: laser frequency 3 Hz, laser pulse duration 8 ms, pulse energy similar to 19 J, number of scans 3 (binary alloy), i.e., 4 (ternary alloy). T2 - International Journal of Advanced Manufacturing Technology T1 - An investigation on synthesis development of high hardened, high conductivity Cu-Zr and Cu-Zr-ZrB2 alloys through green compact laser sintering VL - 80 IS - 5-8 SP - 1049 EP - 1057 DO - 10.1007/s00170-015-7098-y ER -
@article{ author = "Stašić, Jelena and Rajković, Višeslava M. and Ružić, Jovana and Božić, Dušan", year = "2015", abstract = "Cold pressed mechanically alloyed Cu-1Zr (wt%) and Cu-4.1Zr-1.1B (wt%) powders were sintered by laser irradiation. Laser employed was pulsed, millisecond Nd:YAG laser system. The influence of different sintering parameters on structural, mechanical, and physical properties of laser-sintered materials was investigated. Microstructural changes during laser sintering were studied using scanning electron microscopy and X-ray diffraction. High hardening of the Cu-Zr alloy is achieved by thermal treatment due to the influence of the developed rapidly solidified structure and precipitation of metastable CuZr. In ternary Cu-Zr-B alloy rapidly solidified structure, as well as the presence of ZrB2 particles and metastable CuZr phase, affected much higher degree of copper matrix hardening which, thanks to the ceramic particles, is retained at high temperatures. It was determined that the optimum combination of high density, microhardness, and electrical conductivity is reached using the following parameters: laser frequency 3 Hz, laser pulse duration 8 ms, pulse energy similar to 19 J, number of scans 3 (binary alloy), i.e., 4 (ternary alloy).", journal = "International Journal of Advanced Manufacturing Technology", title = "An investigation on synthesis development of high hardened, high conductivity Cu-Zr and Cu-Zr-ZrB2 alloys through green compact laser sintering", volume = "80", number = "5-8", pages = "1049-1057", doi = "10.1007/s00170-015-7098-y" }
Stašić, J., Rajković, V. M., Ružić, J.,& Božić, D.. (2015). An investigation on synthesis development of high hardened, high conductivity Cu-Zr and Cu-Zr-ZrB2 alloys through green compact laser sintering. in International Journal of Advanced Manufacturing Technology, 80(5-8), 1049-1057. https://doi.org/10.1007/s00170-015-7098-y
Stašić J, Rajković VM, Ružić J, Božić D. An investigation on synthesis development of high hardened, high conductivity Cu-Zr and Cu-Zr-ZrB2 alloys through green compact laser sintering. in International Journal of Advanced Manufacturing Technology. 2015;80(5-8):1049-1057. doi:10.1007/s00170-015-7098-y .
Stašić, Jelena, Rajković, Višeslava M., Ružić, Jovana, Božić, Dušan, "An investigation on synthesis development of high hardened, high conductivity Cu-Zr and Cu-Zr-ZrB2 alloys through green compact laser sintering" in International Journal of Advanced Manufacturing Technology, 80, no. 5-8 (2015):1049-1057, https://doi.org/10.1007/s00170-015-7098-y . .