Surface modification of a-CN/TiAlN double layer coating on ASP 30 steel induced by femtosecond laser with 10(13)-10(14) W/cm(2) intensity in vacuum
Само за регистроване кориснике
Stašić, Jelena M.
Milovanović, Dubravka S.
Branković, Goran O.
Чланак у часопису
МетаподациПриказ свих података о документу
A double layer a-CN/TiAlN coating deposited on ASP30 steel substrate was irradiated by femtosecond laser and surface modification effects were observed. Moderate laser intensities used were in the range of 10(14)-10(13) W/cm(2), while the total thickness of double layer coating was 4.8 mu m (a-CN = 0.6 and TiAlN = 4.2 mu m). Laser-induced changes of the surface showed dependence on laser intensity and number of accumulated pulses. Irradiations at the highest intensity resulted in preservation of one or both layers up to 10 pulses, while at lower intensity (10(13) W/cm(2)) a-CN layer is removed after several pulses and TiAlN is preserved up to 50 pulses. Evaluated damage threshold of the target was 0.49 J/cm(2). Lower laser intensity irradiation produced periodic surface structures (LIPSS) over the entire irradiated spot with periodicity of similar to 700 nm, almost in agreement with the laser wavelength used. Irradiations carried out at the highest laser intensity (10(14) W/cm(2)) and ...laser pulse count of 50 resulted in the creation of crater like damages with depth up to 20 mu m. Craters were conically shaped, implying intensive processes which took place at the surface. Generation of LIPSS as well as craters can be of great interest for contemporary technologies.
Кључне речи:Double layer a-CN/TiAlN coating / Femtosecond laser / Laser-induced craters / Laser-induced periodic surface structures / Laser surface modification
Извор:Laser and Particle Beams, 2015, 33, 3, 551-559
- Ефекти дејства ласерског зрачења и плазме на савремене материјале при њиховој синтези, модификацији и анализи (RS-172019)
- COST action [MP1208], Ministry of Education, Youth and Sports of the Czech Republic [LD14089, LG13029], Slovenian Research Agency [P2-0082-1]
ISSN: 0263-0346 (print); 1469-803X (electronic)
Showing items related by title, author, creator and subject.
The influence of applying the additional continuous laser on the synthesis of silicon-based nanoparticles by picosecond laser ablation in liquid Popovic, D. M.; Chai, J. S.; Zekic, A. A.; Trtica, Milan; Stašić, Jelena M.; Sarvan, M. Z. (Laser Physics Letters, 2014)
Continuous wave laser for tailoring the photoluminescence of silicon nanoparticles produced by laser ablation in liquid Popovic, Dusan M.; Kushima, Akihiro; Bogdanovic, Milena I.; Chai, Jong Seo; Kasalica, Becko; Trtica, Milan; Stašić, Jelena M.; Zekic, Andrijana A. (Journal of Applied Physics, 2017)
Elemental analysis of aluminum alloys by Laser Induced Breakdown Spectroscopy based on TEA CO2 laser Živković, Sanja; Savović, Jelena; Trtica, Milan; Mutić, Jelena J.; Momčilović, Miloš (Journal of Alloys and Compounds, 2017)