Experimental and Analytical Research of the Heat Transfer Process in the Package of Perforated Plates
Аутори
Živković, PredragTomić, Mladen A.
Janevski, Jelena N.
Stevanović, Žana
Milutinovic, Biljana B.
Vukić, Mića V.
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
The need for compact heat exchangers has led to the development of many types of surfaces that enhance the rate of heat transfer, among them the perforated plate heat exchangers, also known as matrix heat exchangers. The perforated plate heat exchangers consist of a series of perforated plates that are separated by a series of spacers. The present study investigates the heat transfer characteristics of the package of perforated plates. Perforated plates were 2 mm thick, with holes with 2 mm in diameter and porosity of 25.6%. The package of one, two, and three perforated plates was set in the channel of the experimental chamber at which entrance was a thrust fan with the ability to control the flow rate. The fluid flow rates, the temperatures of the fluids at the inlet and outlet of the chamber and the temperature of the air between the plates, were measured at the pre-defined locations in the package and the experimental chamber. Based on the measurements, heat transfer coefficients fo...r the individual plates, as well as for the packages of perforated plates were determined. In further research, an iterative analytical procedure for investigation of the heat transfer process and the overall heat transfer coefficient for the package of perforated plates were developed. Based on these analytical and experimental results, conclusions were drawn about the heat transfer in a package of perforated plates.
Кључне речи:
heat transfer / package / perforated plate / matrix heat exchangerИзвор:
Thermal Science, 2016, 20, S1251-S1257Финансирање / пројекти:
- Унапређење енергетских карактеристика и квалитета унутрашњег простора у зградама образовних установа у Србији са утицајем на здравље (RS-MESTD-Integrated and Interdisciplinary Research (IIR or III)-42008)
Напомена:
- 17th Symposium of the Society-of-Thermal-Engineers-of-Serbia (SIMTERM), Oct 20-23, 2015, Sokobanja, Serbia
DOI: 10.2298/TSCI16S5251Z
ISSN: 0354-9836; 2334-7163
WoS: 000389964200007
Scopus: 2-s2.0-85012061619
Колекције
Институција/група
VinčaTY - JOUR AU - Živković, Predrag AU - Tomić, Mladen A. AU - Janevski, Jelena N. AU - Stevanović, Žana AU - Milutinovic, Biljana B. AU - Vukić, Mića V. PY - 2016 UR - https://vinar.vin.bg.ac.rs/handle/123456789/7135 AB - The need for compact heat exchangers has led to the development of many types of surfaces that enhance the rate of heat transfer, among them the perforated plate heat exchangers, also known as matrix heat exchangers. The perforated plate heat exchangers consist of a series of perforated plates that are separated by a series of spacers. The present study investigates the heat transfer characteristics of the package of perforated plates. Perforated plates were 2 mm thick, with holes with 2 mm in diameter and porosity of 25.6%. The package of one, two, and three perforated plates was set in the channel of the experimental chamber at which entrance was a thrust fan with the ability to control the flow rate. The fluid flow rates, the temperatures of the fluids at the inlet and outlet of the chamber and the temperature of the air between the plates, were measured at the pre-defined locations in the package and the experimental chamber. Based on the measurements, heat transfer coefficients for the individual plates, as well as for the packages of perforated plates were determined. In further research, an iterative analytical procedure for investigation of the heat transfer process and the overall heat transfer coefficient for the package of perforated plates were developed. Based on these analytical and experimental results, conclusions were drawn about the heat transfer in a package of perforated plates. T2 - Thermal Science T1 - Experimental and Analytical Research of the Heat Transfer Process in the Package of Perforated Plates VL - 20 SP - S1251 EP - S1257 DO - 10.2298/TSCI16S5251Z ER -
@article{ author = "Živković, Predrag and Tomić, Mladen A. and Janevski, Jelena N. and Stevanović, Žana and Milutinovic, Biljana B. and Vukić, Mića V.", year = "2016", abstract = "The need for compact heat exchangers has led to the development of many types of surfaces that enhance the rate of heat transfer, among them the perforated plate heat exchangers, also known as matrix heat exchangers. The perforated plate heat exchangers consist of a series of perforated plates that are separated by a series of spacers. The present study investigates the heat transfer characteristics of the package of perforated plates. Perforated plates were 2 mm thick, with holes with 2 mm in diameter and porosity of 25.6%. The package of one, two, and three perforated plates was set in the channel of the experimental chamber at which entrance was a thrust fan with the ability to control the flow rate. The fluid flow rates, the temperatures of the fluids at the inlet and outlet of the chamber and the temperature of the air between the plates, were measured at the pre-defined locations in the package and the experimental chamber. Based on the measurements, heat transfer coefficients for the individual plates, as well as for the packages of perforated plates were determined. In further research, an iterative analytical procedure for investigation of the heat transfer process and the overall heat transfer coefficient for the package of perforated plates were developed. Based on these analytical and experimental results, conclusions were drawn about the heat transfer in a package of perforated plates.", journal = "Thermal Science", title = "Experimental and Analytical Research of the Heat Transfer Process in the Package of Perforated Plates", volume = "20", pages = "S1251-S1257", doi = "10.2298/TSCI16S5251Z" }
Živković, P., Tomić, M. A., Janevski, J. N., Stevanović, Ž., Milutinovic, B. B.,& Vukić, M. V.. (2016). Experimental and Analytical Research of the Heat Transfer Process in the Package of Perforated Plates. in Thermal Science, 20, S1251-S1257. https://doi.org/10.2298/TSCI16S5251Z
Živković P, Tomić MA, Janevski JN, Stevanović Ž, Milutinovic BB, Vukić MV. Experimental and Analytical Research of the Heat Transfer Process in the Package of Perforated Plates. in Thermal Science. 2016;20:S1251-S1257. doi:10.2298/TSCI16S5251Z .
Živković, Predrag, Tomić, Mladen A., Janevski, Jelena N., Stevanović, Žana, Milutinovic, Biljana B., Vukić, Mića V., "Experimental and Analytical Research of the Heat Transfer Process in the Package of Perforated Plates" in Thermal Science, 20 (2016):S1251-S1257, https://doi.org/10.2298/TSCI16S5251Z . .