Influence of Preparation Conditions of Alumina-Based Refractory on the Morphological Parameters of Surface Defects
Samo za registrovane korisnike
2015
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
The surface defects on alumina-based refractory arising from thermal shock were studied using image analysis and statistical tools. Alumina-based refractory specimens were prepared by adding a different amount of fibers into their original composition and compacted on different pressures. Obtained specimens were subjected to thermal shock, and induced surface defects were characterized by their morphological parameters determined using the image analysis procedure. The influence of preparation conditions on the surface defects morphology was studied using principle component analysis. It was shown that morphological parameters of defects vary corresponding to the composition and preparation conditions of ceramic material.
Izvor:
International Journal of Applied Ceramic Technology, 2015, 12, 3, 598-607Finansiranje / projekti:
- Razvoj opreme i procesa dobijanja polimernih kompozitnih materijala sa unapred definisanim funkcionalnim svojstvima (RS-MESTD-Technological Development (TD or TR)-34011)
- Ispitivanje i verifikacija metoda za multidisciplinarne forenzičke analize u funkciji neproliferacije oružja za masovno uništenje (RS-MESTD-Technological Development (TD or TR)-37021)
DOI: 10.1111/ijac.12209
ISSN: 1546-542X; 1744-7402
WoS: 000353382500014
Scopus: 2-s2.0-84928372590
Kolekcije
Institucija/grupa
VinčaTY - JOUR AU - Dimitrijevic, Marija AU - Jančić-Heinemann, Radmila AU - Mitraković, Dragan AU - Gajić-Kvaščev, Maja PY - 2015 UR - https://vinar.vin.bg.ac.rs/handle/123456789/510 AB - The surface defects on alumina-based refractory arising from thermal shock were studied using image analysis and statistical tools. Alumina-based refractory specimens were prepared by adding a different amount of fibers into their original composition and compacted on different pressures. Obtained specimens were subjected to thermal shock, and induced surface defects were characterized by their morphological parameters determined using the image analysis procedure. The influence of preparation conditions on the surface defects morphology was studied using principle component analysis. It was shown that morphological parameters of defects vary corresponding to the composition and preparation conditions of ceramic material. T2 - International Journal of Applied Ceramic Technology T1 - Influence of Preparation Conditions of Alumina-Based Refractory on the Morphological Parameters of Surface Defects VL - 12 IS - 3 SP - 598 EP - 607 DO - 10.1111/ijac.12209 ER -
@article{ author = "Dimitrijevic, Marija and Jančić-Heinemann, Radmila and Mitraković, Dragan and Gajić-Kvaščev, Maja", year = "2015", abstract = "The surface defects on alumina-based refractory arising from thermal shock were studied using image analysis and statistical tools. Alumina-based refractory specimens were prepared by adding a different amount of fibers into their original composition and compacted on different pressures. Obtained specimens were subjected to thermal shock, and induced surface defects were characterized by their morphological parameters determined using the image analysis procedure. The influence of preparation conditions on the surface defects morphology was studied using principle component analysis. It was shown that morphological parameters of defects vary corresponding to the composition and preparation conditions of ceramic material.", journal = "International Journal of Applied Ceramic Technology", title = "Influence of Preparation Conditions of Alumina-Based Refractory on the Morphological Parameters of Surface Defects", volume = "12", number = "3", pages = "598-607", doi = "10.1111/ijac.12209" }
Dimitrijevic, M., Jančić-Heinemann, R., Mitraković, D.,& Gajić-Kvaščev, M.. (2015). Influence of Preparation Conditions of Alumina-Based Refractory on the Morphological Parameters of Surface Defects. in International Journal of Applied Ceramic Technology, 12(3), 598-607. https://doi.org/10.1111/ijac.12209
Dimitrijevic M, Jančić-Heinemann R, Mitraković D, Gajić-Kvaščev M. Influence of Preparation Conditions of Alumina-Based Refractory on the Morphological Parameters of Surface Defects. in International Journal of Applied Ceramic Technology. 2015;12(3):598-607. doi:10.1111/ijac.12209 .
Dimitrijevic, Marija, Jančić-Heinemann, Radmila, Mitraković, Dragan, Gajić-Kvaščev, Maja, "Influence of Preparation Conditions of Alumina-Based Refractory on the Morphological Parameters of Surface Defects" in International Journal of Applied Ceramic Technology, 12, no. 3 (2015):598-607, https://doi.org/10.1111/ijac.12209 . .