Modeling FAMA ion beam diagnostics based on the Ptolemy II model
Чланак у часопису
МетаподациПриказ свих података о документу
The previously developed model of ion beam transport control of the FAMA facility is further enhanced by equipping it with the model of ion beam diagnostics. The model of control, executing once, is adjusted so that it executes in iterative mode, where each iteration samples the input beam normally distributed over initial phase space and calculates a single trajectory through the facility beam lines. The model takes into account only the particles that manage to pass through all the beam line apertures, emulating in this way a Faraday cup and a beam profile meter. Generated are also beam phase space distributions and horizontal and vertical beam profiles at the end of the beam transport lines the FAMA facility consists of. By adding the model of ion beam diagnostics to the model of ion beam transport control, the process of determining optimal ion beam control parameters is eased and speeded up, and the understanding of influence of control parameters on the ion beam characteristics i...s improved. (C) 2012 Elsevier B.V. All rights reserved.
Кључне речи:Model / Ion beams / Diagnostics / Control / Transport
Извор:Nuclear Instruments and Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors, and Associated Equipment, 2012, 690, 17-26
- Физика и хемија са јонским сноповима (RS-45006)
ISSN: 0168-9002 (print)