Influence of mechanical activation on electrical properties of barium-zinc-titanate ceramics sintered at 1100A degrees C
Pavlović, Vladimir B.
Ristic, M. M.
Чланак у часопису
МетаподациПриказ свих података о документу
Starting mixtures of BaCO3, ZnO, and TiO2 powders are mechanically activated in a planetary ball mill for various periods of time. The powders obtained are sintered isothermally at 1100A degrees C for 120 min. Non-isothermal sintering process is followed by measurements with a sensitive dilatometer, as well. Results of microstructure characterization using SEM analyses along with DTA analyses are provided. These results are correlated with the values of electric resistivity, capacitance, and loss tangent of the samples, and it is found that with increasing milling time, the increase in values of electrical properties is noticed.
Кључне речи:milling / sintering / SEM / DTA / ceramics
Извор:Powder Metallurgy and Metal Ceramics, 2012, 50, 11-12, 714-718
- Ministry of Science of Republic of Serbia [142011 G], Serbian Academy of Sciences and Arts
ISSN: 1068-1302 (print)