Non-noble metal catalyst for a future Pt free PEMFC
Nema prikaza
Autori
Tasić, Gvozden S.Miljanić, Šćepan S.
Marčeta Kaninski, Milica
Šaponjić, Đorđe
Nikolić, Vladimir M.
Članak u časopisu
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
We have investigated the possibility of developing high-performance, cost-effective and durable non-noble Co metal electrocatalyst for PEMFC. In this work we applied electrodeposition process for PEMFC electrode preparation that is very efficient and far simpler than any other investigated method. The fuel cell with electrodeposited Co as anode catalyst has shown satisfying performance level. In determining FCs operating conditions, subsequent electrochemical impedance and output power measurements were done, which enable the insight into the Co catalyst based anode behavior. Structure analysis of the electrodeposited anode layer was done by means of SEM and EDS technique. Although the Pt catalyst has higher efficiency, its cost performance ratio is significantly lower than for the Co catalyst, thus this investigation gives interesting possibilities in area of stationary fuel cell application. (C) 2009 Elsevier B.V. All rights reserved.
Ključne reči:
PEM fuel cell / Non-noble catalyst / Cobalt / EISIzvor:
Electrochemistry Communications, 2009, 11, 11, 2097-2100Finansiranje / projekti:
- Vodonična energija dobijanje vodonika – gorivne ćelije – izotopski efekti (RS-MESTD-MPN2006-2010-142067)
DOI: 10.1016/j.elecom.2009.09.003
ISSN: 1388-2481
WoS: 000272115600006
Scopus: 2-s2.0-70449084693
Kolekcije
Institucija/grupa
VinčaTY - JOUR AU - Tasić, Gvozden S. AU - Miljanić, Šćepan S. AU - Marčeta Kaninski, Milica AU - Šaponjić, Đorđe AU - Nikolić, Vladimir M. PY - 2009 UR - https://vinar.vin.bg.ac.rs/handle/123456789/3832 AB - We have investigated the possibility of developing high-performance, cost-effective and durable non-noble Co metal electrocatalyst for PEMFC. In this work we applied electrodeposition process for PEMFC electrode preparation that is very efficient and far simpler than any other investigated method. The fuel cell with electrodeposited Co as anode catalyst has shown satisfying performance level. In determining FCs operating conditions, subsequent electrochemical impedance and output power measurements were done, which enable the insight into the Co catalyst based anode behavior. Structure analysis of the electrodeposited anode layer was done by means of SEM and EDS technique. Although the Pt catalyst has higher efficiency, its cost performance ratio is significantly lower than for the Co catalyst, thus this investigation gives interesting possibilities in area of stationary fuel cell application. (C) 2009 Elsevier B.V. All rights reserved. T2 - Electrochemistry Communications T1 - Non-noble metal catalyst for a future Pt free PEMFC VL - 11 IS - 11 SP - 2097 EP - 2100 DO - 10.1016/j.elecom.2009.09.003 ER -
@article{ author = "Tasić, Gvozden S. and Miljanić, Šćepan S. and Marčeta Kaninski, Milica and Šaponjić, Đorđe and Nikolić, Vladimir M.", year = "2009", abstract = "We have investigated the possibility of developing high-performance, cost-effective and durable non-noble Co metal electrocatalyst for PEMFC. In this work we applied electrodeposition process for PEMFC electrode preparation that is very efficient and far simpler than any other investigated method. The fuel cell with electrodeposited Co as anode catalyst has shown satisfying performance level. In determining FCs operating conditions, subsequent electrochemical impedance and output power measurements were done, which enable the insight into the Co catalyst based anode behavior. Structure analysis of the electrodeposited anode layer was done by means of SEM and EDS technique. Although the Pt catalyst has higher efficiency, its cost performance ratio is significantly lower than for the Co catalyst, thus this investigation gives interesting possibilities in area of stationary fuel cell application. (C) 2009 Elsevier B.V. All rights reserved.", journal = "Electrochemistry Communications", title = "Non-noble metal catalyst for a future Pt free PEMFC", volume = "11", number = "11", pages = "2097-2100", doi = "10.1016/j.elecom.2009.09.003" }
Tasić, G. S., Miljanić, Š. S., Marčeta Kaninski, M., Šaponjić, Đ.,& Nikolić, V. M.. (2009). Non-noble metal catalyst for a future Pt free PEMFC. in Electrochemistry Communications, 11(11), 2097-2100. https://doi.org/10.1016/j.elecom.2009.09.003
Tasić GS, Miljanić ŠS, Marčeta Kaninski M, Šaponjić Đ, Nikolić VM. Non-noble metal catalyst for a future Pt free PEMFC. in Electrochemistry Communications. 2009;11(11):2097-2100. doi:10.1016/j.elecom.2009.09.003 .
Tasić, Gvozden S., Miljanić, Šćepan S., Marčeta Kaninski, Milica, Šaponjić, Đorđe, Nikolić, Vladimir M., "Non-noble metal catalyst for a future Pt free PEMFC" in Electrochemistry Communications, 11, no. 11 (2009):2097-2100, https://doi.org/10.1016/j.elecom.2009.09.003 . .