Mechanochemical treatment of alpha-Fe2O3 powder in air atmosphere
Samo za registrovane korisnike
1998
Autori
Zdujić, MiodragJovalekić, Čedomir
Karanović, Ljiljana
Mitrić, Miodrag
Poleti, Dejan
Skala, Dejan
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
Powder of alpha-Fe2O3 was mechanochemically treated in a planetary ball mill in an air atmosphere. Structural changes were followed by X-ray diffraction analysis, magnetization measurements and differential scanning calorimetry after various milling times. It was found that complete transformation of alpha-Fe2O3 to Fe3O4 is possible during milling in an air atmosphere under appropriate milling conditions. Presumably, the decrease in the oxygen partial pressure during milling has a critical influence on promoting the dissociation of alpha-Fe2O3. Before nucleation of the Fe3O4 phase, the crystallites of the alpha-Fe2O3 phase are reduced to a minimal size accompanied by the introduction of atomic-level strain. Local modeling of a collision event, coupled with a classical thermodynamic assessment of the Fe2O3-Fe3O4 system, were used to rationalize the experimental results. It is proposed that the mechanochemical reactions proceed at the moment of impact by a process of energization and fre...ezing of highly localized sites of a short lifetime. Excitation on a time scale of similar to 10(-5) s corresponds to a temperature rise of the order of (1-2) x 10(3) K. Decay of the excited state occurs rapidly at a mean cooling rate higher than 10(6) K s(-1). (C) 1998 Elsevier Science S.A. All rights reserved.
Ključne reči:
hematite / magnetite / ball millingIzvor:
Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 1998, 245, 1, 109-117Finansiranje / projekti:
- Ministry of Science and Technology of the Republic of Serbia
DOI: 10.1016/S0921-5093(97)00715-6
ISSN: 0921-5093
WoS: 000073504100013
Scopus: 2-s2.0-0000353363
Kolekcije
Institucija/grupa
VinčaTY - JOUR AU - Zdujić, Miodrag AU - Jovalekić, Čedomir AU - Karanović, Ljiljana AU - Mitrić, Miodrag AU - Poleti, Dejan AU - Skala, Dejan PY - 1998 UR - https://vinar.vin.bg.ac.rs/handle/123456789/2143 AB - Powder of alpha-Fe2O3 was mechanochemically treated in a planetary ball mill in an air atmosphere. Structural changes were followed by X-ray diffraction analysis, magnetization measurements and differential scanning calorimetry after various milling times. It was found that complete transformation of alpha-Fe2O3 to Fe3O4 is possible during milling in an air atmosphere under appropriate milling conditions. Presumably, the decrease in the oxygen partial pressure during milling has a critical influence on promoting the dissociation of alpha-Fe2O3. Before nucleation of the Fe3O4 phase, the crystallites of the alpha-Fe2O3 phase are reduced to a minimal size accompanied by the introduction of atomic-level strain. Local modeling of a collision event, coupled with a classical thermodynamic assessment of the Fe2O3-Fe3O4 system, were used to rationalize the experimental results. It is proposed that the mechanochemical reactions proceed at the moment of impact by a process of energization and freezing of highly localized sites of a short lifetime. Excitation on a time scale of similar to 10(-5) s corresponds to a temperature rise of the order of (1-2) x 10(3) K. Decay of the excited state occurs rapidly at a mean cooling rate higher than 10(6) K s(-1). (C) 1998 Elsevier Science S.A. All rights reserved. T2 - Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing T1 - Mechanochemical treatment of alpha-Fe2O3 powder in air atmosphere VL - 245 IS - 1 SP - 109 EP - 117 DO - 10.1016/S0921-5093(97)00715-6 ER -
@article{ author = "Zdujić, Miodrag and Jovalekić, Čedomir and Karanović, Ljiljana and Mitrić, Miodrag and Poleti, Dejan and Skala, Dejan", year = "1998", abstract = "Powder of alpha-Fe2O3 was mechanochemically treated in a planetary ball mill in an air atmosphere. Structural changes were followed by X-ray diffraction analysis, magnetization measurements and differential scanning calorimetry after various milling times. It was found that complete transformation of alpha-Fe2O3 to Fe3O4 is possible during milling in an air atmosphere under appropriate milling conditions. Presumably, the decrease in the oxygen partial pressure during milling has a critical influence on promoting the dissociation of alpha-Fe2O3. Before nucleation of the Fe3O4 phase, the crystallites of the alpha-Fe2O3 phase are reduced to a minimal size accompanied by the introduction of atomic-level strain. Local modeling of a collision event, coupled with a classical thermodynamic assessment of the Fe2O3-Fe3O4 system, were used to rationalize the experimental results. It is proposed that the mechanochemical reactions proceed at the moment of impact by a process of energization and freezing of highly localized sites of a short lifetime. Excitation on a time scale of similar to 10(-5) s corresponds to a temperature rise of the order of (1-2) x 10(3) K. Decay of the excited state occurs rapidly at a mean cooling rate higher than 10(6) K s(-1). (C) 1998 Elsevier Science S.A. All rights reserved.", journal = "Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing", title = "Mechanochemical treatment of alpha-Fe2O3 powder in air atmosphere", volume = "245", number = "1", pages = "109-117", doi = "10.1016/S0921-5093(97)00715-6" }
Zdujić, M., Jovalekić, Č., Karanović, L., Mitrić, M., Poleti, D.,& Skala, D.. (1998). Mechanochemical treatment of alpha-Fe2O3 powder in air atmosphere. in Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 245(1), 109-117. https://doi.org/10.1016/S0921-5093(97)00715-6
Zdujić M, Jovalekić Č, Karanović L, Mitrić M, Poleti D, Skala D. Mechanochemical treatment of alpha-Fe2O3 powder in air atmosphere. in Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing. 1998;245(1):109-117. doi:10.1016/S0921-5093(97)00715-6 .
Zdujić, Miodrag, Jovalekić, Čedomir, Karanović, Ljiljana, Mitrić, Miodrag, Poleti, Dejan, Skala, Dejan, "Mechanochemical treatment of alpha-Fe2O3 powder in air atmosphere" in Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 245, no. 1 (1998):109-117, https://doi.org/10.1016/S0921-5093(97)00715-6 . .