Show simple item record

dc.creatorKovacevic, Tihomir
dc.creatorRusmirović, Jelena D.
dc.creatorTomic, Natasa
dc.creatorMarinović-Cincović, Milena
dc.creatorKamberović, Željko
dc.creatorTomić, Miloš
dc.creatorMarinković, Aleksandar D.
dc.date.accessioned2018-03-01T17:49:07Z
dc.date.available2018-03-01T17:49:07Z
dc.date.issued2017
dc.identifier.issn1359-8368 (print)
dc.identifier.issn1879-1069 (electronic)
dc.identifier.urihttp://vinar.vin.bg.ac.rs/handle/123456789/1708
dc.description.abstractInfluence of the addition of three different non-metallic fractions (NMF), obtained by processing of printed circuit boards (PCBs), on the mechanical and thermal properties of unsaturated polyester resin (UPR) based composites were studied in this paper. UPR, based on products of PET depolymerization, and NMF were characterized using FTIR, NMR, optical microscopy and SEM/EDS analysis. Cross-linking density (v), storage modulus (G), damping factor (tan delta) and glass transition temperature (T-g) of the composites were determined from the DMA testing. Tensile (sigma(t)) and flexural (sigma(f)) strength, and micro Vickers hardness indicated good composite performance under static load. Thermal and flame resistant properties were analyzed by TGA/DTG and UL-94 flammability test whereby V-2 category of appropriate composite was achieved. Composites with satisfactory mechanical and thermal properties reflected synergetic effect of constituents obtained from waste materials. (C) 2017 Elsevier Ltd. All rights reserved.en
dc.relationinfo:eu-repo/grantAgreement/MESTD/Technological Development (TD or TR)/34033/RS//
dc.relationinfo:eu-repo/grantAgreement/MESTD/Technological Development (TD or TR)/34011/RS//
dc.rightsrestrictedAccessen
dc.sourceComposites: Part B: Engineeringen
dc.subjectRecyclingen
dc.subjectPolymer-matrix composites (PMCs)en
dc.subjectMechanical propertiesen
dc.subjectThermal propertiesen
dc.subjectPrinted circuit boards (PCBs)en
dc.titleNew composites based on waste PET and non-metallic fraction from waste printed circuit boards: Mechanical and thermal propertiesen
dc.typearticleen
dcterms.abstractКамберовиц, Зељко; Ковацевиц, Тихомир; Русмировиц, Јелена; Мариновић-Цинцовић Милена; Томиц, Натаса; Томиц, Милос; Маринковиц, Aлександар;
dc.citation.volume127
dc.citation.spage1
dc.citation.epage14
dc.identifier.wos000408788000001
dc.identifier.doi10.1016/j.compositesb.2017.06.020
dc.identifier.scopus2-s2.0-85021096956


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record