Synthesis and properties biobased waterborne polyurethanes from glycolysis product of PET waste and poly(caprolactone) diol
Само за регистроване кориснике
2017
Аутори
Cakić, Suzana M.Ristić, Ivan S.
Marinović-Cincović, Milena
Nikolić, Nada Č.
Nikolić, Ljubiša B.
Cvetinov, Miroslav J.
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Novel biobased poly(ester-urethane)s (PUDs) were synthesized by solvent free homogeneous solution polymerization of poly(caprolactone) diol (PCL), castor oil-based polyols (COLs), dimethylolpropionic acid (DMPA), isophorone diisocyanate (IPDI) and 1,4-butane diol (BD) as the chain extender. The polyurethane dispersions were prepared by adding required amount of triethylamine (TEA) and water. In this Work, castor oil-based polyols have been synthesized using the depolymerized oligoester obtained from glycolysis of PET waste with poly(ethylene glycol) (PEG 400) and castor oil. The effects of the soft segments content on the thermal and coatings properties of resulting polyurethane films have been examined by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and measurement of the coatings properties. Phase separation of polyurethane shows a strong correlation with crystallization behaviour of the polyurethane prepare...d. It is established that all PUD samples containing PCL as a part soft segment with different molar ratio of castor-oil polyol are crystallisable polymers. The results from XRD analysis have showed that highest degree of crystallinity (23 and 22%) is reached in polyurethanes based on the largest content PCL diol (CPU77 and CPU73). The thermal stability of samples based on (COL/PCL molar ratio 0.25:0.75) possesses the best thermal properties but less values hardness coatings which can be ascribed to a decrease of the hard segment i.e. DMPA content in polyurethane dispersions. The long-term stability of polyurethane dispersions has been investigated using UV vis spectroscopy. The physico-mechanical properties such as hardness adhesion test and gloss of the dried films have also been determined considering the effect of soft segment content on coating properties. (C) 2016 Elsevier B.V. All rights reserved.
Кључне речи:
Glycolysis PET waste / Castor oil / Waterborne biobased polyurethanes / Thermal stability / CoatingsИзвор:
Progress in Organic Coatings, 2017, 105, 111-122Финансирање / пројекти:
- Вишескално структурирање полимерних нанокомпозита и функционалних материјала применом различитих прекурсора (RS-MESTD-Integrated and Interdisciplinary Research (IIR or III)-45022)
DOI: 10.1016/j.porgcoat.2016.10.038
ISSN: 0300-9440
WoS: 000397359700012
Scopus: 2-s2.0-85009179756
Колекције
Институција/група
VinčaTY - JOUR AU - Cakić, Suzana M. AU - Ristić, Ivan S. AU - Marinović-Cincović, Milena AU - Nikolić, Nada Č. AU - Nikolić, Ljubiša B. AU - Cvetinov, Miroslav J. PY - 2017 UR - https://vinar.vin.bg.ac.rs/handle/123456789/1475 AB - Novel biobased poly(ester-urethane)s (PUDs) were synthesized by solvent free homogeneous solution polymerization of poly(caprolactone) diol (PCL), castor oil-based polyols (COLs), dimethylolpropionic acid (DMPA), isophorone diisocyanate (IPDI) and 1,4-butane diol (BD) as the chain extender. The polyurethane dispersions were prepared by adding required amount of triethylamine (TEA) and water. In this Work, castor oil-based polyols have been synthesized using the depolymerized oligoester obtained from glycolysis of PET waste with poly(ethylene glycol) (PEG 400) and castor oil. The effects of the soft segments content on the thermal and coatings properties of resulting polyurethane films have been examined by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and measurement of the coatings properties. Phase separation of polyurethane shows a strong correlation with crystallization behaviour of the polyurethane prepared. It is established that all PUD samples containing PCL as a part soft segment with different molar ratio of castor-oil polyol are crystallisable polymers. The results from XRD analysis have showed that highest degree of crystallinity (23 and 22%) is reached in polyurethanes based on the largest content PCL diol (CPU77 and CPU73). The thermal stability of samples based on (COL/PCL molar ratio 0.25:0.75) possesses the best thermal properties but less values hardness coatings which can be ascribed to a decrease of the hard segment i.e. DMPA content in polyurethane dispersions. The long-term stability of polyurethane dispersions has been investigated using UV vis spectroscopy. The physico-mechanical properties such as hardness adhesion test and gloss of the dried films have also been determined considering the effect of soft segment content on coating properties. (C) 2016 Elsevier B.V. All rights reserved. T2 - Progress in Organic Coatings T1 - Synthesis and properties biobased waterborne polyurethanes from glycolysis product of PET waste and poly(caprolactone) diol VL - 105 SP - 111 EP - 122 DO - 10.1016/j.porgcoat.2016.10.038 ER -
@article{ author = "Cakić, Suzana M. and Ristić, Ivan S. and Marinović-Cincović, Milena and Nikolić, Nada Č. and Nikolić, Ljubiša B. and Cvetinov, Miroslav J.", year = "2017", abstract = "Novel biobased poly(ester-urethane)s (PUDs) were synthesized by solvent free homogeneous solution polymerization of poly(caprolactone) diol (PCL), castor oil-based polyols (COLs), dimethylolpropionic acid (DMPA), isophorone diisocyanate (IPDI) and 1,4-butane diol (BD) as the chain extender. The polyurethane dispersions were prepared by adding required amount of triethylamine (TEA) and water. In this Work, castor oil-based polyols have been synthesized using the depolymerized oligoester obtained from glycolysis of PET waste with poly(ethylene glycol) (PEG 400) and castor oil. The effects of the soft segments content on the thermal and coatings properties of resulting polyurethane films have been examined by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and measurement of the coatings properties. Phase separation of polyurethane shows a strong correlation with crystallization behaviour of the polyurethane prepared. It is established that all PUD samples containing PCL as a part soft segment with different molar ratio of castor-oil polyol are crystallisable polymers. The results from XRD analysis have showed that highest degree of crystallinity (23 and 22%) is reached in polyurethanes based on the largest content PCL diol (CPU77 and CPU73). The thermal stability of samples based on (COL/PCL molar ratio 0.25:0.75) possesses the best thermal properties but less values hardness coatings which can be ascribed to a decrease of the hard segment i.e. DMPA content in polyurethane dispersions. The long-term stability of polyurethane dispersions has been investigated using UV vis spectroscopy. The physico-mechanical properties such as hardness adhesion test and gloss of the dried films have also been determined considering the effect of soft segment content on coating properties. (C) 2016 Elsevier B.V. All rights reserved.", journal = "Progress in Organic Coatings", title = "Synthesis and properties biobased waterborne polyurethanes from glycolysis product of PET waste and poly(caprolactone) diol", volume = "105", pages = "111-122", doi = "10.1016/j.porgcoat.2016.10.038" }
Cakić, S. M., Ristić, I. S., Marinović-Cincović, M., Nikolić, N. Č., Nikolić, L. B.,& Cvetinov, M. J.. (2017). Synthesis and properties biobased waterborne polyurethanes from glycolysis product of PET waste and poly(caprolactone) diol. in Progress in Organic Coatings, 105, 111-122. https://doi.org/10.1016/j.porgcoat.2016.10.038
Cakić SM, Ristić IS, Marinović-Cincović M, Nikolić NČ, Nikolić LB, Cvetinov MJ. Synthesis and properties biobased waterborne polyurethanes from glycolysis product of PET waste and poly(caprolactone) diol. in Progress in Organic Coatings. 2017;105:111-122. doi:10.1016/j.porgcoat.2016.10.038 .
Cakić, Suzana M., Ristić, Ivan S., Marinović-Cincović, Milena, Nikolić, Nada Č., Nikolić, Ljubiša B., Cvetinov, Miroslav J., "Synthesis and properties biobased waterborne polyurethanes from glycolysis product of PET waste and poly(caprolactone) diol" in Progress in Organic Coatings, 105 (2017):111-122, https://doi.org/10.1016/j.porgcoat.2016.10.038 . .