Show simple item record

dc.creatorGaković, Biljana M.
dc.creatorPetrović, Suzana
dc.creatorAlbu, C.
dc.creatorZamfirescu, M.
dc.creatorPanjan, Peter
dc.creatorMilovanović, Dubravka S.
dc.creatorPopescu-Pelin, G.
dc.creatorMihailescu, Ion N.
dc.date.accessioned2018-03-01T17:15:50Z
dc.date.available2018-03-01T17:15:50Z
dc.date.issued2017
dc.identifier.issn0030-3992 (print)
dc.identifier.issn1879-2545 (electronic)
dc.identifier.urihttp://vinar.vin.bg.ac.rs/handle/123456789/1326
dc.description.abstractProcessing of AlTiN/TiN multilayered hard coatings by femtosecond (fs) laser pulses has been investigated. Irradiation was performed in air with linearly polarized laser radiation with pulses of 200 fs duration at 775 nm wavelength. Single or 1000 subsequent laser pulses were directed at normal incidence towards target surface. Laser energy per pulse was adjusted from 0.5 to 50 mu J and corresponding fluence was 0.17-17.5 J cm(-2). The as deposited and laser-ablated samples were characterized by optical confocal microscopy, optical profilometry and scanning and transmition electron microscopy. In case of the AlTiN/TiN coating, a single-pulse damage threshold of 0.41 J cm(-2) was estimated. Well defined holes/craters with diameters from 7 to 35 mu m, up to 40 mu m depth were drilled, depending on laser pulse energy and number, after 1000 laser pulses. For small energy/fluence, laser induced periodical surface structures were observed. A model is discussed which can account for these features by the accumulation effect during multi-pulse irradiation. The forming craters can prove useful for fabrication of micron solid state lubricant reservoirs in the protective coating-steel system.en
dc.relationinfo:eu-repo/grantAgreement/MESTD/Integrated and Interdisciplinary Research (IIR or III)/45016/RS//
dc.relationSTSM visit grants in the framework of COST Action Developing the physics and the scientific community for inertial fusion [MP 1208], National Authority for Research and Innovation in the frame of Nucleus programme [4N/2016, 304/2011, PN-II-ID-PCE-2012-4-0539]
dc.rightsrestrictedAccessen
dc.sourceOptics and Laser Technologyen
dc.subjectAlTiN/TiN coatingen
dc.subjectFemtosecond pulsesen
dc.subjectlaser ablationen
dc.subjectDamage thresholden
dc.subjectLIPSSen
dc.titlePrecise femtosecond laser crater fabrication in hard nanolayered AlTiN/TiN coating on steel substrateen
dc.typearticleen
dcterms.abstractПањан, П.; Гаковић Биљана М; Михаилесцу, И. Н.; Петровић Сузана; Aлбу, Ц.; Замфиресцу, М.; Попесцу-Пелин, Г.; Миловановић Дубравка;
dc.citation.volume89
dc.citation.spage200
dc.citation.epage207
dc.identifier.wos000389160800029
dc.identifier.doi10.1016/j.optlastec.2016.10.015
dc.identifier.scopus2-s2.0-84994589911


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record