Reuse of Solid Brick Waste Mix in Geopolymerization – a Preliminary Investigation
Аутори
Jelić, IvanaSavić, Aleksandar
Miljojčić, Tatjana
Šljivić-Ivanović, Marija
Dimović, Slavko
Janković, Marija
Stanić, Vojislav
Zakić, Dimitrije
Antonijevic, Dragi
Конференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
The applicability of solid bricks waste in geopolymerization technique was considered. Waste samples were characterized in terms of mineralogical composition by XRD prior to mechanical testing. XRD analysis showed that both brick samples contained anorthite, wollastonite, and mullite as the main components. The compressive strength investigation was carried out by screening method with three geopolymer mixtures. Geopolymer mixtures were prepared with alkaline activators; the mixtures were poured into molds and air-dried for 28 days. The compressive strength of samples was measured according to the standard SRPS EN 12390-3:2010 for cubic samples. The compressive strength values ranged from 9.8 MPa for the newer solid brick, 10.2 MPa for the older solid brick, and 10.5 MPa for the solid brick mix waste geopolymer sample. The most likely underlying reason for the higher compressive strength results of the older solid brick and the mixed sample is their mineral composition, i.e. higher pro...portion of aluminosilicate. However, all samples showed satisfactory compressive strengths, and it represents an excellent basis for further research.
Кључне речи:
Reuse / recycle / compressive strength / constructionИзвор:
IRASA : International Scientific Conference SCIENCE, EDUCATION, TECHNOLOGY AND INNOVATION : SETI V 2023 : Book of Proceedings, 2023, 416-422Издавач:
- Belgrade : IRASA - International Research Academy of Science and Art
Финансирање / пројекти:
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200017 (Универзитет у Београду, Институт за нуклеарне науке Винча, Београд-Винча) (RS-MESTD-inst-2020-200017)
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200092 (Универзитет у Београду, Грађевински факултет) (RS-MESTD-inst-2020-200092)
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200213 (Иновациони центар Машинског факултета у Београду доо) (RS-MESTD-inst-2020-200213)
Напомена:
- SETI V 2023 : International Scientific Conference SCIENCE, EDUCATION, TECHNOLOGY AND INNOVATION : October 14, 2023.
Колекције
Институција/група
VinčaTY - CONF AU - Jelić, Ivana AU - Savić, Aleksandar AU - Miljojčić, Tatjana AU - Šljivić-Ivanović, Marija AU - Dimović, Slavko AU - Janković, Marija AU - Stanić, Vojislav AU - Zakić, Dimitrije AU - Antonijevic, Dragi PY - 2023 UR - https://vinar.vin.bg.ac.rs/handle/123456789/12573 AB - The applicability of solid bricks waste in geopolymerization technique was considered. Waste samples were characterized in terms of mineralogical composition by XRD prior to mechanical testing. XRD analysis showed that both brick samples contained anorthite, wollastonite, and mullite as the main components. The compressive strength investigation was carried out by screening method with three geopolymer mixtures. Geopolymer mixtures were prepared with alkaline activators; the mixtures were poured into molds and air-dried for 28 days. The compressive strength of samples was measured according to the standard SRPS EN 12390-3:2010 for cubic samples. The compressive strength values ranged from 9.8 MPa for the newer solid brick, 10.2 MPa for the older solid brick, and 10.5 MPa for the solid brick mix waste geopolymer sample. The most likely underlying reason for the higher compressive strength results of the older solid brick and the mixed sample is their mineral composition, i.e. higher proportion of aluminosilicate. However, all samples showed satisfactory compressive strengths, and it represents an excellent basis for further research. PB - Belgrade : IRASA - International Research Academy of Science and Art C3 - IRASA : International Scientific Conference SCIENCE, EDUCATION, TECHNOLOGY AND INNOVATION : SETI V 2023 : Book of Proceedings T1 - Reuse of Solid Brick Waste Mix in Geopolymerization – a Preliminary Investigation SP - 416 EP - 422 UR - https://hdl.handle.net/21.15107/rcub_vinar_12573 ER -
@conference{ author = "Jelić, Ivana and Savić, Aleksandar and Miljojčić, Tatjana and Šljivić-Ivanović, Marija and Dimović, Slavko and Janković, Marija and Stanić, Vojislav and Zakić, Dimitrije and Antonijevic, Dragi", year = "2023", abstract = "The applicability of solid bricks waste in geopolymerization technique was considered. Waste samples were characterized in terms of mineralogical composition by XRD prior to mechanical testing. XRD analysis showed that both brick samples contained anorthite, wollastonite, and mullite as the main components. The compressive strength investigation was carried out by screening method with three geopolymer mixtures. Geopolymer mixtures were prepared with alkaline activators; the mixtures were poured into molds and air-dried for 28 days. The compressive strength of samples was measured according to the standard SRPS EN 12390-3:2010 for cubic samples. The compressive strength values ranged from 9.8 MPa for the newer solid brick, 10.2 MPa for the older solid brick, and 10.5 MPa for the solid brick mix waste geopolymer sample. The most likely underlying reason for the higher compressive strength results of the older solid brick and the mixed sample is their mineral composition, i.e. higher proportion of aluminosilicate. However, all samples showed satisfactory compressive strengths, and it represents an excellent basis for further research.", publisher = "Belgrade : IRASA - International Research Academy of Science and Art", journal = "IRASA : International Scientific Conference SCIENCE, EDUCATION, TECHNOLOGY AND INNOVATION : SETI V 2023 : Book of Proceedings", title = "Reuse of Solid Brick Waste Mix in Geopolymerization – a Preliminary Investigation", pages = "416-422", url = "https://hdl.handle.net/21.15107/rcub_vinar_12573" }
Jelić, I., Savić, A., Miljojčić, T., Šljivić-Ivanović, M., Dimović, S., Janković, M., Stanić, V., Zakić, D.,& Antonijevic, D.. (2023). Reuse of Solid Brick Waste Mix in Geopolymerization – a Preliminary Investigation. in IRASA : International Scientific Conference SCIENCE, EDUCATION, TECHNOLOGY AND INNOVATION : SETI V 2023 : Book of Proceedings Belgrade : IRASA - International Research Academy of Science and Art., 416-422. https://hdl.handle.net/21.15107/rcub_vinar_12573
Jelić I, Savić A, Miljojčić T, Šljivić-Ivanović M, Dimović S, Janković M, Stanić V, Zakić D, Antonijevic D. Reuse of Solid Brick Waste Mix in Geopolymerization – a Preliminary Investigation. in IRASA : International Scientific Conference SCIENCE, EDUCATION, TECHNOLOGY AND INNOVATION : SETI V 2023 : Book of Proceedings. 2023;:416-422. https://hdl.handle.net/21.15107/rcub_vinar_12573 .
Jelić, Ivana, Savić, Aleksandar, Miljojčić, Tatjana, Šljivić-Ivanović, Marija, Dimović, Slavko, Janković, Marija, Stanić, Vojislav, Zakić, Dimitrije, Antonijevic, Dragi, "Reuse of Solid Brick Waste Mix in Geopolymerization – a Preliminary Investigation" in IRASA : International Scientific Conference SCIENCE, EDUCATION, TECHNOLOGY AND INNOVATION : SETI V 2023 : Book of Proceedings (2023):416-422, https://hdl.handle.net/21.15107/rcub_vinar_12573 .