Polymer-Lipid Matrices based on Carboxymethyl Cellulose/Solagum and Liposomes for Controlled Release of Folic Acid
Само за регистроване кориснике
2023
Аутори
Batinić, Petar M.Đorđević, Verica B.
Obradović, Nataša
Krstić, Aleksandar D.
Stevanović, Sanja I.
Balanč, Bojana
Marković, Smilja
Pjanović, Rada V.
Mijin, Dušan Ž.
Bugarski, Branko M.
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Liposome-encapsulated folic acid is incorporated into the films made from sodium carboxymethyl cellulose (CMC) (2 mas%) and a mixture of CMC and solagum (9:1 w/w) using the film-forming cast solution method. Histidine is used to increase solubility for folic acid in liposomes (1–5 mg mL−1), and propylene glycol is used as a film plasticizer (2.6 mas%). The obtained films (50–60 µm tick) containing 3.12–20.19 mg of folic acid per gram of film are envisaged to be used as patches for transdermal delivery of folic acid. Therefore, some physical, mechanical, release and structural attributes of the films are scrutinized. Folic acid gives yellow color to the films and contributes to stronger chemical bonds which result in improved strength of the film. Liposomes prolong the release of folic acid from films to 24 h without adverse effects on mechanical properties of the films, but degrade homogeneity of the films, which can be ascribed to its agglomeration within the film matrix as revealed b...y atomic force microscopy. According to the release at pH 5.5, the film formulation based on a blend of CMC and solagum containing 3 mg mL−1 liposome-encapsulated folic acid is recommended. Practical Application: Folic acid is effective in reducing oxidative stress levels in the skin and neutralizing the harmful free radicals and is also essential for various metabolic reactions in the body. However, the limited solubility of folic acid linked with its poor absorption in an organism, low storage stability, short half-life upon oral consumption, specific food preferences of some people, extensive liver metabolism, and pregnancy-induced vomiting point to a large potential in transdermal usage of folic acid. This has motivated us to design new multicomponent polymer-lipid systems as an alternative solution to overcome some of these drawbacks. The results obtained for these multicomponent films pointed to their potential for prolonged release of folic acid to 24 h, which can also be useful for scientists interested in encapsulating similar poorly soluble compounds in CMC patches. The finding can be also valuable information for pharmaceutical manufacturers and scientists worldwide.
Кључне речи:
biopolymer films / polymer–lipid interactions / structural analysis / study of controlled releases / thermal stabilityИзвор:
European Journal of Lipid Science and Technology, 2023, 2200169-Финансирање / пројекти:
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200287 (Иновациони центар Технолошко-металуршког факултета у Београду доо) (RS-MESTD-inst-2020-200287)
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200135 (Универзитет у Београду, Технолошко-металуршки факултет) (RS-MESTD-inst-2020-200135)
Колекције
Институција/група
VinčaTY - JOUR AU - Batinić, Petar M. AU - Đorđević, Verica B. AU - Obradović, Nataša AU - Krstić, Aleksandar D. AU - Stevanović, Sanja I. AU - Balanč, Bojana AU - Marković, Smilja AU - Pjanović, Rada V. AU - Mijin, Dušan Ž. AU - Bugarski, Branko M. PY - 2023 UR - https://vinar.vin.bg.ac.rs/handle/123456789/10851 AB - Liposome-encapsulated folic acid is incorporated into the films made from sodium carboxymethyl cellulose (CMC) (2 mas%) and a mixture of CMC and solagum (9:1 w/w) using the film-forming cast solution method. Histidine is used to increase solubility for folic acid in liposomes (1–5 mg mL−1), and propylene glycol is used as a film plasticizer (2.6 mas%). The obtained films (50–60 µm tick) containing 3.12–20.19 mg of folic acid per gram of film are envisaged to be used as patches for transdermal delivery of folic acid. Therefore, some physical, mechanical, release and structural attributes of the films are scrutinized. Folic acid gives yellow color to the films and contributes to stronger chemical bonds which result in improved strength of the film. Liposomes prolong the release of folic acid from films to 24 h without adverse effects on mechanical properties of the films, but degrade homogeneity of the films, which can be ascribed to its agglomeration within the film matrix as revealed by atomic force microscopy. According to the release at pH 5.5, the film formulation based on a blend of CMC and solagum containing 3 mg mL−1 liposome-encapsulated folic acid is recommended. Practical Application: Folic acid is effective in reducing oxidative stress levels in the skin and neutralizing the harmful free radicals and is also essential for various metabolic reactions in the body. However, the limited solubility of folic acid linked with its poor absorption in an organism, low storage stability, short half-life upon oral consumption, specific food preferences of some people, extensive liver metabolism, and pregnancy-induced vomiting point to a large potential in transdermal usage of folic acid. This has motivated us to design new multicomponent polymer-lipid systems as an alternative solution to overcome some of these drawbacks. The results obtained for these multicomponent films pointed to their potential for prolonged release of folic acid to 24 h, which can also be useful for scientists interested in encapsulating similar poorly soluble compounds in CMC patches. The finding can be also valuable information for pharmaceutical manufacturers and scientists worldwide. T2 - European Journal of Lipid Science and Technology T1 - Polymer-Lipid Matrices based on Carboxymethyl Cellulose/Solagum and Liposomes for Controlled Release of Folic Acid SP - 2200169 DO - 10.1002/ejlt.202200169 ER -
@article{ author = "Batinić, Petar M. and Đorđević, Verica B. and Obradović, Nataša and Krstić, Aleksandar D. and Stevanović, Sanja I. and Balanč, Bojana and Marković, Smilja and Pjanović, Rada V. and Mijin, Dušan Ž. and Bugarski, Branko M.", year = "2023", abstract = "Liposome-encapsulated folic acid is incorporated into the films made from sodium carboxymethyl cellulose (CMC) (2 mas%) and a mixture of CMC and solagum (9:1 w/w) using the film-forming cast solution method. Histidine is used to increase solubility for folic acid in liposomes (1–5 mg mL−1), and propylene glycol is used as a film plasticizer (2.6 mas%). The obtained films (50–60 µm tick) containing 3.12–20.19 mg of folic acid per gram of film are envisaged to be used as patches for transdermal delivery of folic acid. Therefore, some physical, mechanical, release and structural attributes of the films are scrutinized. Folic acid gives yellow color to the films and contributes to stronger chemical bonds which result in improved strength of the film. Liposomes prolong the release of folic acid from films to 24 h without adverse effects on mechanical properties of the films, but degrade homogeneity of the films, which can be ascribed to its agglomeration within the film matrix as revealed by atomic force microscopy. According to the release at pH 5.5, the film formulation based on a blend of CMC and solagum containing 3 mg mL−1 liposome-encapsulated folic acid is recommended. Practical Application: Folic acid is effective in reducing oxidative stress levels in the skin and neutralizing the harmful free radicals and is also essential for various metabolic reactions in the body. However, the limited solubility of folic acid linked with its poor absorption in an organism, low storage stability, short half-life upon oral consumption, specific food preferences of some people, extensive liver metabolism, and pregnancy-induced vomiting point to a large potential in transdermal usage of folic acid. This has motivated us to design new multicomponent polymer-lipid systems as an alternative solution to overcome some of these drawbacks. The results obtained for these multicomponent films pointed to their potential for prolonged release of folic acid to 24 h, which can also be useful for scientists interested in encapsulating similar poorly soluble compounds in CMC patches. The finding can be also valuable information for pharmaceutical manufacturers and scientists worldwide.", journal = "European Journal of Lipid Science and Technology", title = "Polymer-Lipid Matrices based on Carboxymethyl Cellulose/Solagum and Liposomes for Controlled Release of Folic Acid", pages = "2200169", doi = "10.1002/ejlt.202200169" }
Batinić, P. M., Đorđević, V. B., Obradović, N., Krstić, A. D., Stevanović, S. I., Balanč, B., Marković, S., Pjanović, R. V., Mijin, D. Ž.,& Bugarski, B. M.. (2023). Polymer-Lipid Matrices based on Carboxymethyl Cellulose/Solagum and Liposomes for Controlled Release of Folic Acid. in European Journal of Lipid Science and Technology, 2200169. https://doi.org/10.1002/ejlt.202200169
Batinić PM, Đorđević VB, Obradović N, Krstić AD, Stevanović SI, Balanč B, Marković S, Pjanović RV, Mijin DŽ, Bugarski BM. Polymer-Lipid Matrices based on Carboxymethyl Cellulose/Solagum and Liposomes for Controlled Release of Folic Acid. in European Journal of Lipid Science and Technology. 2023;:2200169. doi:10.1002/ejlt.202200169 .
Batinić, Petar M., Đorđević, Verica B., Obradović, Nataša, Krstić, Aleksandar D., Stevanović, Sanja I., Balanč, Bojana, Marković, Smilja, Pjanović, Rada V., Mijin, Dušan Ž., Bugarski, Branko M., "Polymer-Lipid Matrices based on Carboxymethyl Cellulose/Solagum and Liposomes for Controlled Release of Folic Acid" in European Journal of Lipid Science and Technology (2023):2200169, https://doi.org/10.1002/ejlt.202200169 . .