TiO2/WO3 photocatalytic composite coatings prepared by spray pyrolysis
Нема приказа
Аутори
Grbic, BoskoRadić, Nenad
Stojadinovic, Stevan
Vasilic, Rastko
Dohčević-Mitrović, Zorana
Šaponjić, Zoran
Stefanov, Plamen
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
TiO2/WO3 composites supported on a stainless steel foil were prepared by the spray pyrolysis technique. Content of WO3 was gradually increased from 1 wt% to 100 wt.%, while the coating thickness was limited to about 1 pm. The coatings were characterized by X-ray diffraction, scanning electron microscopy, atomic force microscopy, X-ray photoelectron spectroscopy, and Raman spectroscopy. The photocatalytic activity of obtained coatings was investigated by degradation of methyl orange, used as model pollutant. The results show that with increasing WO3 content up to 10 wt.% photoactivity increases as result of better charge separation that could effectively prevent the recombination of photogenerated electrons and holes. Further increase of WO3 content led to decrease of photoactivity. (C) 2014 Elsevier B.V. All rights reserved.
Кључне речи:
Photocatalysis / Spray pyrolysis / Coatings / TiO2/WO3 compositesИзвор:
Surface and Coatings Technology, 2014, 258, 763-771Финансирање / пројекти:
- Графитне и неорганске наноструктуре ниске димензионалности (RS-MESTD-Basic Research (BR or ON)-171035)
- Развој ефикаснијих хемијско-инжењерских процеса заснован на истраживањима феномена преноса и принципима интензификације процеса (RS-MESTD-Basic Research (BR or ON)-172022)
- Хемијско и структурно дизајнирање наноматеријала за примену у медицини и инжењерству ткива (RS-MESTD-Basic Research (BR or ON)-172026)
DOI: 10.1016/j.surfcoat.2014.07.082
ISSN: 0257-8972
WoS: 000346895000093
Scopus: 2-s2.0-84912520637
Колекције
Институција/група
VinčaTY - JOUR AU - Grbic, Bosko AU - Radić, Nenad AU - Stojadinovic, Stevan AU - Vasilic, Rastko AU - Dohčević-Mitrović, Zorana AU - Šaponjić, Zoran AU - Stefanov, Plamen PY - 2014 UR - https://vinar.vin.bg.ac.rs/handle/123456789/315 AB - TiO2/WO3 composites supported on a stainless steel foil were prepared by the spray pyrolysis technique. Content of WO3 was gradually increased from 1 wt% to 100 wt.%, while the coating thickness was limited to about 1 pm. The coatings were characterized by X-ray diffraction, scanning electron microscopy, atomic force microscopy, X-ray photoelectron spectroscopy, and Raman spectroscopy. The photocatalytic activity of obtained coatings was investigated by degradation of methyl orange, used as model pollutant. The results show that with increasing WO3 content up to 10 wt.% photoactivity increases as result of better charge separation that could effectively prevent the recombination of photogenerated electrons and holes. Further increase of WO3 content led to decrease of photoactivity. (C) 2014 Elsevier B.V. All rights reserved. T2 - Surface and Coatings Technology T1 - TiO2/WO3 photocatalytic composite coatings prepared by spray pyrolysis VL - 258 SP - 763 EP - 771 DO - 10.1016/j.surfcoat.2014.07.082 ER -
@article{ author = "Grbic, Bosko and Radić, Nenad and Stojadinovic, Stevan and Vasilic, Rastko and Dohčević-Mitrović, Zorana and Šaponjić, Zoran and Stefanov, Plamen", year = "2014", abstract = "TiO2/WO3 composites supported on a stainless steel foil were prepared by the spray pyrolysis technique. Content of WO3 was gradually increased from 1 wt% to 100 wt.%, while the coating thickness was limited to about 1 pm. The coatings were characterized by X-ray diffraction, scanning electron microscopy, atomic force microscopy, X-ray photoelectron spectroscopy, and Raman spectroscopy. The photocatalytic activity of obtained coatings was investigated by degradation of methyl orange, used as model pollutant. The results show that with increasing WO3 content up to 10 wt.% photoactivity increases as result of better charge separation that could effectively prevent the recombination of photogenerated electrons and holes. Further increase of WO3 content led to decrease of photoactivity. (C) 2014 Elsevier B.V. All rights reserved.", journal = "Surface and Coatings Technology", title = "TiO2/WO3 photocatalytic composite coatings prepared by spray pyrolysis", volume = "258", pages = "763-771", doi = "10.1016/j.surfcoat.2014.07.082" }
Grbic, B., Radić, N., Stojadinovic, S., Vasilic, R., Dohčević-Mitrović, Z., Šaponjić, Z.,& Stefanov, P.. (2014). TiO2/WO3 photocatalytic composite coatings prepared by spray pyrolysis. in Surface and Coatings Technology, 258, 763-771. https://doi.org/10.1016/j.surfcoat.2014.07.082
Grbic B, Radić N, Stojadinovic S, Vasilic R, Dohčević-Mitrović Z, Šaponjić Z, Stefanov P. TiO2/WO3 photocatalytic composite coatings prepared by spray pyrolysis. in Surface and Coatings Technology. 2014;258:763-771. doi:10.1016/j.surfcoat.2014.07.082 .
Grbic, Bosko, Radić, Nenad, Stojadinovic, Stevan, Vasilic, Rastko, Dohčević-Mitrović, Zorana , Šaponjić, Zoran, Stefanov, Plamen, "TiO2/WO3 photocatalytic composite coatings prepared by spray pyrolysis" in Surface and Coatings Technology, 258 (2014):763-771, https://doi.org/10.1016/j.surfcoat.2014.07.082 . .